In Stock
✓ Available
Atlas Copco COP 1032HD Hydraulic Rock Drill - 9853 5591 50e / 9853559150e
Atlas Copco
Atlas Copco COP 1032HD hydraulic rock drill. Complete spare parts list with 154 part numbers (catalogue 9853 5591 50e). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Compatible Brand | Atlas Copco |
| Reference Part Number | 9853 5591 50e / 9853559150e |
| Catalogue No. | 9853 5591 50e |
| Part Name | Rock Drills |
| Equipment Model | COP 1032HD |
| Product Type | Aftermarket |
| Product Condition | New OEM-Quality |
| Origin | Turkey |
| Shipping | World-wide |
| Warranty | 12 Months |
Complete Parts List 154
All parts of this rock drill. Click a part number to request a quote.
| Ref. | Part Number | Description | Qty | Remarks |
|---|---|---|---|---|
| 3115 1620 90 | PART NUMER 3115 1873 90 | |||
| 3115 1032 92 | SEAL KIT 1032 | |||
| 3115 0839 90 | SET OF SEALS | |||
| 3115 0839 91 | SET OF SEALS | |||
| 3115 0262 00 | VALVE COMPLETE | |||
| 3115 1620 00 | GUIDE R32 | |||
| 3115 1622 00 | STOP RING 32 | |||
| 3115 1623 00 | SIDE BOLT | |||
| 3115 0287 00 | WASHER | |||
| 3115 0286 00 | DOME NUT | |||
| 3115 2065 00 | DRIVER | |||
| 3115 0297 01 | SHIM | |||
| 3115 0297 02 | SHIM | |||
| 3115 0297 03 | SHIM | |||
| 0509 0223 00 | BEARING | |||
| 0509 0222 00 | BEARING | |||
| 3115 0971 00 | BUSHING | |||
| 0516 4045 00 | NEEDLE BEARING | |||
| 0516 4135 01 | INNER RING | |||
| 0516 4139 01 | INNER RING | |||
| 0516 4049 00 | NEEDLE BEARING | |||
| 3115 1650 00 | WASHER | |||
| 3115 1017 00 | SPACER RING | |||
| 3115 0791 00 | CHUCH BUSHING | |||
| 3115 0792 00 | DAMPING PISTON | |||
| 3115 2626 00 | PISTON GUIDE | |||
| 3115 0799 00 | PISTON GUIDE | |||
| 3115 1822 00 | DIAPHRAGM | |||
| 3115 2702 00 | SCREW | |||
| 9853 5591 50 | SPARE PARTS LIST | |||
| 9853 0559 01 | OVERHAUL MANUAL | |||
| 3115 1029 90 | INCLUDING ABOVE KIT 3115 1620 90 3115 1029 92 INCLUDING ABOVE KIT 3115 1873 90 | |||
| 3115 1029 00 | PISTON | |||
| 3115 1029 91 | INCLUDING ABOVE KIT 3115 1029 90 3115 1029 93 INCLUDING ABOVE KIT 3115 1029 92 | |||
| 3115 0804 00 | GEAR | |||
| 3115 1653 00 | COUPLING | |||
| 3115 2627 00 | FLUSHING HEAD R32 1 | |||
| 3115 0953 00 | VALVE COVER | |||
| 3115 1027 00 | VALVE LINER | |||
| 3115 1823 00 | VALVE PLUNGER | |||
| 3115 1032 91 | SEAL KIT | |||
| 3115 2385 00 | CUP SEAL | |||
| 0665 1000 65 | CUP SEAL | |||
| 0666 7190 01 | SEAL RING | |||
| 0666 7188 01 | SEAL RING | |||
| 1 | 3115 1576 00 | |||
| 2 | 3115 1620 00 | GUIDE R32 | ||
| 2 | 3115 1873 00 | |||
| 3 | 3115 2385 00 | CUP SEAL | ||
| 3 | 0665 1000 65 | CUP SEAL | ||
| 5 | 3115 2627 00 | FLUSHING HEAD R32 1 | ||
| 5 | 3115 2628 00 | |||
| 7 | 3115 1622 00 | STOP RING 32 | ||
| 7 | 3115 1875 80 | |||
| 3115 1577 80 | ||||
| 9 | 0666 7190 01 | RADIAL LIP SEAL | ||
| 12 | 0102 0460 00 | PIN | ||
| 14 | 9000 0344 00 | HEXAGON NIPPLE | ||
| 15 | 9000 0325 00 | HOSE NIPPLE | ||
| 16 | 9000 0333 00 | COUPLING NUT | ||
| 17 | 3115 1623 00 | SIDE BOLT | ||
| 18 | 3115 0287 00 | WASHER | ||
| 19 | 3115 0286 00 | DOME NUT | ||
| 21 | 7803 3588 01 | |||
| 21 | 7803 3576 01 | SHANK ADAPTER (R32) | ||
| 21 | 7804 3575 01 | |||
| 21 | 7304 3576 01 | |||
| 22 | 3115 2065 00 | DRIVER | ||
| 23 | 3115 0297 01 | A) SHIM, 0.10 MM | ||
| 23 | 3115 0297 02 | A) SHIM, 0.15 MM | ||
| 23 | 3115 0297 03 | A) SHIM, 0.5 MM | ||
| 24 | 0509 0223 00 | ROLLER BEARING | ||
| 25 | 3115 0789 00 | ROTATION CHUCK | ||
| 26 | 0509 0222 00 | ROLLER BEARING | ||
| 27 | 0291 1180 01 | LOCK NUT | ||
| 3115 1012 80 | ||||
| 29 | 0544 2162 00 | GREASE NIPPLE | ||
| 30 | 0686 3101 00 | PLUG | ||
| 31 | 0666 7188 01 | RADIAL LIP SEAL | ||
| 33 | 3115 0971 00 | BUSHING | ||
| 34 | 0516 4045 00 | NEEDLE BEARING | ||
| 35 | 0516 4135 01 | INNER RING | ||
| 36 | 0516 4139 01 | INNER RING | ||
| 37 | 0516 4049 00 | NEEDLE BEARING | ||
| 38 | 3115 1650 00 | WASHER | ||
| 39 | 3115 0804 00 | GEAR | ||
| 40 | 3115 1653 00 | COUPLING | ||
| 41 | 3115 1017 00 | SPACER RING | ||
| 3115 1032 90 | TORIQUES 3115 1032 90 | |||
| 42 | 3176 6565 00 | NIPPLE FOR ROTATION MOTOR | ||
| 43 | 3715 0597 00 | CAP | ||
| 44 | 3115 0839 80 | |||
| 45 | 0147 1418 03 | |||
| 46 | 3115 0791 00 | CHUCH BUSHING | ||
| 47 | 3115 0792 00 | DAMPING PISTON | ||
| 49 | 3115 1011 00 | |||
| 3115 1014 80 | ||||
| 52 | 3115 0844 00 | SEAL KIT | ||
| 53 | 3115 2626 00 | PISTON GUIDE | ||
| 55 | 3115 1029 00 | PISTON | ||
| 56 | 3176 6344 00 | NIPPLE | ||
| 57 | 3176 5313 00 | CAP | ||
| 58 | 3715 0585 00 | NIPPLE | ||
| 59 | 3176 6515 00 | NIPPLE FOR ROTATION MOTOR | ||
| 61 | 3115 1763 82 | |||
| 63 | 3176 6566 00 | NIPPLE | ||
| 64 | 3715 0820 00 | CAP | ||
| 65 | 3115 0796 00 | REGULATING PLUG | ||
| 66 | 3115 1695 00 | SEAL WASHER | ||
| 67 | 3115 0797 00 | NUT | ||
| 3115 1032 00 | ||||
| 3115 1460 00 | PLUG | |||
| 0259 2061 00 | THREAD INSERT | |||
| 3115 1336 80 | ||||
| 70 | 3115 0799 00 | PISTON GUIDE, REAR | ||
| 71 | 3115 0845 00 | SET OF SEALS (HF) | ||
| 73 | 3115 1335 00 | |||
| 74 | 0147 1483 03 | SCREW, HEX HEAD | ||
| 76 | 3115 0953 00 | VALVE COVER | ||
| 78 | 3115 1027 00 | VALVE LINER | ||
| 79 | 3115 1823 00 | VALVE PISTON | ||
| 81 | 3115 1179 01 | A) SHIM, 0.10 MM | ||
| 81 | 3115 1179 02 | A) SHIM, 0.15 MM | ||
| 3115 2281 09 | ||||
| 3115 1032 91 | TORIQUES 3115 1032 91 | |||
| 5 | 3115 2072 90 | |||
| 3115 0839 80 | ||||
| 1 | 3115 0839 01 | SCREW | ||
| 4 | 3115 0839 48 | FLANGE | 1 | |
| 7 | 3115 0839 07 | BEARING RACE | 1 | |
| 8 | 3115 0839 08 | THRUST BEARING | 1 | |
| 9 | 3115 0839 26 | SEAL PLUG | 2 | |
| 11 | 3115 0839 41 | DRIVE SHAFT | 1 | |
| 13 | 3115 0839 34 | DISTRIBUTOR PLATE | 1 | |
| 14 | 3115 0839 35 | ORBIT SET | 1 | |
| 15 | 3115 0839 18 | COVER | 1 | |
| 17 | 3115 0839 44 | SCREW | 7 | |
| 19 | 3115 0839 24 | DRAIN PLUG | 1 | |
| 3115 0839 90 | SET OF SEALS | |||
| 3115 0839 80 | ||||
| 7 | 3115 0839 49 | BEARING RACE | 1 | |
| 8 | 3115 0839 50 | THRUST BEARING | 1 | |
| 9 | 3115 0839 26 | SEAL PLUG | 2 | |
| 11 | 3115 0839 52 | DRIVE SHAFT | 1 | |
| 13 | 3115 0839 34 | DISTRIBUTOR PLATE | 1 | |
| 14 | 3115 0839 35 | ORBIT SET | 1 | |
| 15 | 3115 0839 54 | COVER | 1 | |
| 17 | 3115 0839 44 | SCREW | 7 | |
| 7 | 3115 0839 91 | SET OF SEALS | ||
| 3115 2696 80 | ACCUMULATOR | |||
| 2 | 3115 1822 00 | DIAPHRAGM | 1 | |
| 4 | 3115 2702 00 | SCREW | 2 | |
| 3115 2196 81 | TEST VALVE, COMPL | 1 | ||
| 3115 0262 00 | VALVE, COMPL | 1 | ||
| 10 | 3310 4076 00 | CAP | 1 | |
| 12 | 3115 2629 00 | SAFETY LABEL | 1 | |
| 13 | 3115 2630 00 | SAFETY LABEL (N2) | 1 | |
| 14 | 3115 2714 00 | DATA LABEL | 1 | |
| 3115 1032 91 | TORIQUES 3115 1032 91 | |||
| 3115 1032 91 | O-RING SET | 1 | ||
| 3115 1902 80 | PRESS TOOL, COMPL | 1 | ||
| 3115 1902 00 | GUIDE PLATE | 1 | ||
| 3115 0317 00 | SCREW | 1 | ||
| 3115 0328 00 | WING NUT | 1 | ||
| 3115 0318 00 | EXTENSION TOOL FOR 3115 1902 80 ALLONGE POUR 3115 1902 80 | 1 | ||
| 3115 1113 00 | PRESS TOOL FOR FITTING OF PARTS | 1 | ||
| 3115 1114 00 | MANDREL FOR FITTING OF PARTS | 1 | ||
| 3115 1115 00 | 1 | |||
| 3115 1116 00 | MANDREL FOR FITTING OF PARTS | 1 | ||
| 3115 1903 00 | PRESS TOOL FOR FITTING OF PARTS | 1 | ||
| 3115 1118 80 | 1 | |||
| 3115 1118 00 | PLATE | 1 | ||
| 3115 1119 00 | SCREW | 1 | ||
| 3115 1120 00 | SCREW | 2 | ||
| 3115 1121 00 | PLUG | 1 | ||
| 3115 1122 00 | SCREW | 1 | ||
| 9000 0330 00 | NUT | 1 | ||
| 0266 2112 00 | NUT | 2 | ||
| 3091 0455 90 | EXTRACTOR | 1 | ||
| 3115 0329 80 | ASSEMBLY PLATE | 1 | ||
| 3115 0343 00 | WRENCH ADAPTER, 24 MM | 1 | ||
| 3115 0344 00 | WRENCH ADAPTER, 32 MM | 1 | ||
| 3115 1877 00 | ASSEMBLY TOOL | 1 | ||
| 3115 0974 00 | ASSEMBLY TOOL FOR | 1 | ||
| 3115 1821 80 | CHARGING HOSE FOR ACCUMULATOR | 1 | ||
| 3115 1821 00 | HOSE | 1 | ||
| 3115 2075 00 | ADAPTER | 1 | ||
| 3115 0642 00 | NIPPLE | 1 | ||
| 3115 0644 00 | NIPPLE | 1 | ||
| 3115 0646 00 | GAS-CYLINDER PRESSURE REGULATOR FOR CHARG | 1 | ||
| 3115 1126 00 | ASSEMBLY TOOL | 1 | ||
| 3115 1123 00 | PIN FOR LOCKING THE PISTON | 1 | ||
| 3115 1124 00 | WASHER FOR LOCKING OF PART | 1 | ||
| 3115 1898 00 | FIXTURE FOR LOCKING OF MOTOR SHAFT DISPOSITIF DE FIXATION POUR BLOCAGE | 1 | ||
| 3115 0978 00 | PRESSURE GAUGE (FOR BOTTLE | 1 | ||
| 3115 1632 00 | PRESSURE GAUGE BAR | 1 | ||
| 0371 1101 00 | LIFTING EYE | 1 | ||
| 3115 1900 00 | MANDREL FOR GUIDE R38 (PAGE 3) MANDRIN POUR GUIDE R38 (PAGE 3) | 1 | ||
| 3115 1864 91 | SET OF SEALS (48, 50, PAGE 5) | 1 | ||
| 3115 0926 00 | RUBBER HOOD | 1 | ||
| 0108 1351 00 | TUBULAR PIN | 1 |
Product Features
- OEM-compatible design and specifications
- Premium quality aftermarket component
- Tested for performance and durability
- Compatible with Atlas Copco / Epiroc equipment
- Competitive pricing compared to OEM parts
- Available for immediate shipment
Compatibility Information
This drilling screw is designed for the ROC T15 Surface Drill Rig and related Atlas Copco / Epiroc equipment. Please verify compatibility with your specific equipment model before placing an order.
For technical specifications, compatibility questions, or detailed product information, please contact our technical support team.
Ordering Information
Quantity Available: In Stock
Lead Time: 1-2 Days
Minimum Order: 1 Unit
Bulk Discounts: Available on orders of 10+ units
Contact our sales team for custom orders or special requests.
Related Products
Other Atlas Copco / Epiroc spare parts that may interest you:
