Stokta Var
✓ Available
Atlas Copco COP 1838-1850CR-CRL Hydraulic Rock Drill - 9853 5996 50c / 9853599650c
Atlas Copco
Atlas Copco COP 1838-1850CR-CRL hydraulic rock drill. Complete spare parts list with 242 part numbers (catalogue 9853 5996 50c). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Uyumlu Marka | Atlas Copco |
| Referans Parça Numarası | 9853 5996 50c / 9853599650c |
| Katalog No. | 9853 5996 50c |
| Parça Adı | Rock Drills |
| Ekipman Modeli | COP 1838-1850CR-CRL |
| Ürün Tipi | Aftermarket |
| Ürün Durumu | New OEM-Quality |
| Menşei | Turkey |
| Teslimat | World-wide |
| Garanti | 12 Months |
Eksiksiz Parça Listesi 242
Bu tabancanın tüm parçaları. Teklif almak için parça numarasına tıklayın.
| Poz | Parça Numarası | Tanım | Adet | Açıklama |
|---|---|---|---|---|
| 2 | 3115 1457 00 | SIDE BOLT | 1 | |
| 4 | 3115 0297 01 | A) SHIM, 0.10 MM | ||
| 4 | 3115 0297 02 | A) SHIM, 0.15 MM | ||
| 4 | 3115 0297 03 | A) SHIM, 0.5 MM | ||
| 5 | 0509 0223 00 | ROLLER BEARING | 1 | |
| 6 | 0667 4111 00 | CUP SEAL | 2 | |
| 3115 3017 80 | ROTATION CHUCK, COMPL | 1 | ||
| 8 | 3115 2552 00 | BUSHING | 1 | |
| 9 | 0509 0221 00 | ROLLER BEARING | 1 | |
| 10 | 3115 2578 01 | ANVIL &5 | 1 | |
| 10 | 3115 2581 01 | ANVIL &5 | 1 | |
| 3115 2521 80 | GEAR HOUSING, COMPL | 1 | ||
| 12 | 3115 1460 00 | PLUG | 2 | |
| 13 | 0686 4201 03 | PLUG | 1 | |
| 14 | 0653 9038 00 | GASKET | 1 | |
| 15 | 0544 2162 00 | LUBRICATING NIPPLE | 1 | |
| 16 | 0666 7188 01 | SEAL RING | 1 | |
| 17 | 0335 2169 00 | LOCK RING | 1 | |
| 19 | 3115 2555 00 | ROTATION CHUCK BUSHING | 1 | |
| 20 | 3115 0273 00 | WASHER | 4 | |
| 21 | 0515 3100 13 | NEEDLE BEARING | 2 | |
| 22 | 3115 0823 00 | WASHER | 3 | |
| 23 | 3115 2551 00 | GEAR | 3 | |
| 24 | 3115 2547 00 | INTERMEDIATE SHAFT | 1 | |
| 26 | 3115 2553 00 | BEARING SLEEVE | 1 | |
| 27 | 0516 1504 01 | NEEDLE BEARING | 1 | |
| 28 | 0516 1538 00 | NEEDLE BEARING | 1 | |
| 29 | 3115 0824 00 | SLEEVE | 1 | |
| 30 | 0667 1206 00 | CUP SEAL | 1 | |
| 31 | 3115 2742 00 | GUIDE SLEEVE | 1 | |
| 33 | 3115 2548 00 | SHAFT | 1 | |
| 34 | 3115 2522 00 | MOTOR BRACKET | 1 | |
| 35 | 0147 1365 03 | SCREW | 5 | |
| 36 | 0335 2130 00 | CIRCLIP | 2 | |
| 37 | 3115 0277 00 | COUPLING | 2 | |
| 38 | 3115 1165 00 | STUD | 4 | |
| 39 | 3115 1010 83 | HYDRAULIC MOTOR | 2 | |
| 40 | 3115 1454 00 | NUT | 8 | |
| 3115 0821 80 | SHAFT, COMPL | 1 | ||
| 42 | 0516 1504 01 | NEEDLE BEARING | 1 | |
| 43 | 3115 0823 00 | WASHER | 1 | |
| 44 | 0516 1538 00 | NEEDLE BEARING | 1 | |
| 45 | 3115 0824 00 | SLEEVE | 1 | |
| 46 | 0667 1206 00 | CUP SEAL | 1 | |
| 47 | 3115 2742 00 | GUIDE SLEEVE | 1 | |
| 48 | 3115 2382 00 | DAMPING PISTON | 1 | |
| 3115 2583 82 | INTERMEDIATE PART, COMPL | 1 | ||
| 0259 2061 00 | THREAD INSERT | 4 | ||
| 0259 0068 00 | THREAD INSERT | 2 | ||
| 50 | 3115 1746 06 | NOZZLE 1.7 MM) | 2 | |
| 51 | 0686 6442 00 | PLUG | 1 | |
| 52 | 0661 1020 00 | SEAL WASHER | 1 | |
| 54 | 0196 1318 00 | SET SCREW | 2 | |
| 55 | 3115 2669 00 | LINER | 1 | |
| 58 | 0335 3500 10 | LOCK RING | 1 | |
| 59 | 3115 2084 00 | BUSHING | 1 | |
| 62 | 3115 2114 00 | CONNECTION PLATE | 1 | |
| 63 | 0211 1960 84 | SCREW | 2 | |
| 65 | 0686 9110 00 | PROTECTIVE PLUG | 2 | |
| 66 | 3115 2900 80 | INTAKE ACCUMULATOR | 1 | |
| 67 | 3115 2700 80 | DAMPER ACCUMULATOR | 1 | |
| 69 | 3115 2383 00 | VALVE POPPET | 1 | |
| 71 | 3115 2384 00 | VALVE SEAT | 1 | |
| 72 | 3176 6517 00 | NIPPLE | 1 | |
| 73 | 3715 0820 00 | CAP | 1 | |
| 74 | 3176 6512 00 | NIPPLE | 2 | |
| 75 | 3176 5313 00 | CAP | 2 | |
| 3115 2766 80 | SEAL HOUSING, COMPL | 1 | ||
| 3115 2759 80 | SEAL HOUSING, COMPL | 1 | ||
| 77 | 3115 0970 00 | SET OF SEALS | 2 | |
| 77 | 3115 2559 00 | SET OF SEALS | 2 | |
| 80 | 3115 1671 00 | PISTON GUIDE, FRONT | 1 | |
| 80 | 3115 2558 00 | PISTON GUIDE, FRONT | 1 | |
| 82 | 3115 1765 00 | VALVE PISTON | 1 | |
| 83 | 3115 2077 03 | VALVE COVER, LEFT | 1 | |
| 83 | 3115 2077 05 | VALVE COVER, LEFT | 1 | |
| 84 | 3115 2076 05 | VALVE COVER, RIGHT | 1 | |
| 84 | 3115 2076 03 | VALVE COVER, RIGHT | 1 | |
| 85 | 0147 1438 03 | SCREW | 4 | |
| 86 | 3115 2342 00 | REGULATING PLUG | 1 | |
| 86 | 3115 2115 02 | REGULATING PLUG | 1 | |
| 87 | 3115 1697 00 | SEAL WASHER | 2 | |
| 88 | 3115 1692 00 | DOME NUT | 1 | |
| 3115 1944 80 | CYLINDER, COMPL | 1 | ||
| 90 | 3115 1825 00 | PIPE PLUG | 1 | |
| 91 | 0686 6447 04 | PLUG | 2 | |
| 92 | 0661 1034 00 | SEAL WASHER | 2 | |
| 0259 0011 00 | THREAD INSERT | 4 | ||
| 0259 2061 00 | THREAD INSERT | 3 | ||
| 0259 0311 00 | THREAD INSERT | 1 | ||
| 93 | 3115 2112 00 | GUIDE | 1 | |
| 94 | 3115 1165 00 | STUD | 4 | |
| 95 | 3115 0286 00 | DOME NUT | 2 | |
| 96 | 3115 0287 00 | WASHER | 2 | |
| 98 | 3115 2126 00 | PISTON | 1 | |
| 98 | 3115 2853 00 | PISTON | 1 | |
| 100 | 3115 2124 00 | PISTON GUIDE, REAR | 1 | |
| 3115 2760 80 | SEAL HOUSING, COMPL | 1 | ||
| 102 | 3115 2554 00 | SET OF SEALS | 2 | |
| 104 | 3115 2111 00 | BACK HEAD | 1 | |
| 104 | 3115 2561 00 | BACK HEAD | 1 | |
| 105 | 3115 2945 00 | BREATHER | 1 | |
| 106 | 3115 0327 00 | GASKET | 2 | |
| 107 | 0147 1481 03 | SCREW | 3 | |
| 108 | 3176 6514 00 | NIPPLE (1/2", DRAINAGE) | 1 | |
| 109 | 3715 0597 00 | CAP | 3 | |
| 110 | 3115 2615 91 | RETURN ACCUMULATOR | 1 | |
| 3115 2570 90 | HOSE SET, COMPL | 1 | ||
| 111 | 3115 1459 00 | NIPPLE | 2 | |
| 112 | 3176 6515 00 | NIPPLE | 1 | |
| 113 | 3176 6565 00 | NIPPLE | 1 | |
| 114 | 3715 0585 00 | NIPPLE | 1 | |
| 115 | 3176 6581 00 | NIPPLE | 1 | |
| 116 | 3176 6595 00 | NIPPLE | 1 | |
| 117 | 0574 2255 11 | HOSE | 1 | |
| 118 | 0574 2256 11 | HOSE | 1 | |
| 3115 2132 06 | LABEL "COP 1838CR" | 1 | ||
| 3115 2132 07 | LABEL "COP 1838CRL" | 1 | ||
| 3115 2560 01 | LABEL "COP 1850CR" | 1 | ||
| 3115 2560 04 | LABEL "COP 1850CRL" | 1 | ||
| 1 | 3115 2544 00 | FRONT HEAD | 1 | |
| 2 | 3115 2545 00 | GUIDE | 1 | |
| 4 | 3115 2372 00 | CUP SEAL | 3 | |
| 5 | 3115 2546 00 | FLUSHING HEAD | 1 | |
| 7 | 0102 0473 00 | CYLINDRICAL PIN | 1 | |
| 3115 2339 80 | COVER, COMPL | 1 | ||
| 9 | 0666 7190 01 | RADIAL LIP SEAL | 1 | |
| 10 | 0335 2173 00 | LOCK RING | 1 | |
| 11 | 3115 0286 00 | DOME NUT | 2 | |
| 12 | 3115 0287 00 | WASHER | 2 | |
| 13 | 3115 2113 00 | SIDE BOLT | 2 | |
| 15 | 3115 2550 00 | CONNECTION PLATE | 1 | |
| 16 | 3315 0195 08 | LOCK WASHER | 4 | |
| 17 | 0147 1401 03 | SCREW | 4 | |
| 18 | 3176 6518 00 | NIPPLE | 1 | |
| 19 | 7970 8937 80 | TUBE ADAPTER &5 | 1 | |
| 19 | 7970 8939 80 | TUBE ADAPTER &5 | 1 | |
| 20 | 7970 8912 00 | ROD GUIDE | 1 | |
| 21 | 7970 8932 80 | COUPLING, COMPL | 1 | |
| 22 | 0147 1647 00 | SCREW | 2 | |
| 23 | 0291 1118 00 | LOCK NUT | 2 | |
| 3115 1010 93 | SET OF SEALS | 1 | ||
| 1 | 3115 1010 47 | BEARING HOUSING | 1 | |
| 3 | 3115 1010 48 | SPLINED SHAFT | 1 | |
| 6 | 3115 1010 65 | INTERMEDIATE PLATE | 1 | |
| 7 | 3115 0839 24 | DRAIN PLUG | 1 | |
| 8 | 3115 1010 58 | WASHER | 1 | |
| 9 | 3115 1010 49 | CARDAN SHAFT | 1 | |
| 9 | 3115 1010 59 | CARDAN SHAFT 5 | ||
| 11 | 3115 1010 70 | COG WHEEL SET | 1 | |
| 11 | 3115 1010 69 | |||
| 12 | 3115 1010 71 | CHANNEL PLATE | 1 | |
| 13 | 3115 1010 76 | CHECK VALVE BALL | 2 | |
| 14 | 3115 1010 12 | VALVE DRIVE | 1 | |
| 15 | 3115 1010 14 | VALVE | 1 | |
| 16 | 3115 1010 72 | BALANCE PLATE | 1 | |
| 17 | 3115 1010 73 | PIN | 1 | |
| 20 | 3115 1010 19 | SPACER | 1 | |
| 21 | 3115 1010 74 | SPRING | 1 | |
| 22 | 3115 1010 75 | VALVE HOUSING | 1 | |
| 24 | 3115 1010 53 | SCREW | 4 | |
| 24 | 3115 1953 00 | |||
| 2 | 3115 2902 00 | NUT | 1 | |
| 3 | 3115 2903 00 | COMPRESSION SPRING | 1 | |
| 4 | 3115 2901 00 | DIAPHRAGM SUPPORT | 1 | |
| 5 | 3115 2472 00 | DIAPHRAGM | 1 | |
| 7 | 3115 2703 00 | SCREW | 2 | |
| 3115 2196 81 | TEST VALVE, COMPL | 1 | ||
| 3115 0262 00 | VALVE, COMPL | 1 | ||
| 13 | 3310 4076 00 | CAP | 1 | |
| 15 | 3115 2629 00 | SAFETY LABEL | 1 | |
| 16 | 3115 2630 00 | SAFETY LABEL (N2) | 1 | |
| 17 | 3115 2712 00 | DATA LABEL | 1 | |
| 2 | 3115 1822 00 | DIAPHRAGM | 1 | |
| 3115 0262 00 | VALVE, COMPL | 1 | ||
| 5 | 3310 4076 00 | CAP | 1 | |
| 3115 2196 81 | TEST VALVE, COMPL | 1 | ||
| 11 | 3115 2629 00 | SAFETY LABEL | 1 | |
| 12 | 3115 2630 00 | SAFETY LABEL (N2) | 1 | |
| 13 | 3115 2702 00 | SCREW | 2 | |
| 3115 2615 80 | RETURN ACCUMULATOR | 1 | ||
| 1 | 3115 1926 02 | DIAPHRAGM | 1 | |
| 3 | 3176 6528 00 | NIPPLE | 1 | |
| 4 | 0661 1038 00 | SEAL RING | 1 | |
| 5 | 0663 2128 00 | O-RING | 1 | |
| 6 | 3115 2618 00 | COVER | 1 | |
| 7 | 3115 2380 00 | FLANGE TUBE | 1 | |
| 8 | 9125 6191 00 | O-RING | 1 | |
| 9 | 0663 9104 01 | O-RING | 2 | |
| 10 | 3115 2379 00 | SEAL | 1 | |
| 11 | 3115 2617 10 | PLUG | 1 | |
| 3115 2275 80 | HOLDER, COMPL | 1 | ||
| 12 | 3115 2276 00 | HOLDER | 1 | |
| 13 | 3115 2275 00 | CLAMP | 1 | |
| 14 | 0147 1328 03 | SCREW | 2 | |
| 15 | 0291 2819 00 | LOCK NUT | 2 | |
| 16 | 0147 1483 03 | SCREW | 1 | |
| 17 | 3176 6567 00 | NIPPLE | 1 | |
| 3115 0262 00 | VALVE, COMPL | 1 | ||
| 19 | 3310 4076 00 | CAP | 1 | |
| 20 | 0663 9056 00 | O-RING | 1 | |
| 3115 9157 90 | O-RING SET | 1 | ||
| 3115 2859 80 | ASSEMBLY TOOL FOR ACCUMULATOR | 1 | ||
| 3115 2859 00 | ASSEMBLY TOOL | 1 | ||
| 3115 2860 00 | PIN | 2 | ||
| 3115 2861 00 | RING | 1 | ||
| 0266 2114 00 | NUT | 2 | ||
| 3115 2519 00 | TIGHTENING TOOL FOR ACCUMULATOR | 1 | ||
| 3115 2391 81 | ||||
| 3115 0978 00 | PRESSURE GAUGE (FOR BOTTLE | 1 | ||
| 0371 1102 00 | LIFTING EYE | 1 | ||
| 3115 2163 00 | MANDREL FOR FITTING OF PART | 1 | ||
| 3115 2736 00 | SPACER TUBE | 1 | ||
| 3115 2737 00 | MANDREL FOR FITTING OF PART | 1 | ||
| 3115 2263 00 | SPANNER FOR PART (40, PAGE 3) | 1 | ||
| 0686 4249 00 | PLUG FOR REMOVING OF PARTS | 1 | ||
| 3115 2868 90 | GRINDING KIT 190 | 1 | ||
| 3115 2868 00 | FIXTURE | 1 | ||
| 8423 1230 44 | GRINDER | 1 | ||
| 4150 0074 00 | COLLET | 1 | ||
| 3115 2867 00 | GRINDING PIN | 1 | ||
| 8202 0302 04 | BALL VALVE | 1 | ||
| 3115 2946 01 | GRANUATION SIZE 6MY | 1 | ||
| 3115 2946 02 | GRANUATION SIZE 15MY | 1 | ||
| 3115 2946 03 | GRANUATION SIZE 30MY | 1 | ||
| 3115 2694 00 | MANDREL FOR FITTING OF PART | 1 | ||
| 3115 2695 00 | SLEEVE FOR REMOVING OF PART | 1 | ||
| 3115 2692 00 | PRESS TOOL FOR FITTING OF PART | 1 | ||
| 3115 1902 80 | PRESS (BASIC TOOL) COMPL | 1 | ||
| 3115 1902 00 | GUIDE PLATE | 1 | ||
| 3115 2735 00 | SCREW | 1 | ||
| 3115 2734 00 | WING NUT | 1 | ||
| 3115 0318 00 | EXTENSION TOOL FOR 3115 1902 80 ALLONGE POUR 3115 1902 80 | 1 | ||
| 3115 1113 00 | PRESS TOOL FOR FITTING OF PARTS | 1 | ||
| 3115 0312 00 | MANDREL FOR FITTING OF PARTS | 1 | ||
| 3115 0313 00 | MANDREL FOR REMOVING OF PARTS | 1 | ||
| 3115 0314 00 | MANDREL FOR REMOVING OF PARTS | 1 | ||
| 3115 1019 00 | MANDREL | 1 | ||
| 3115 0343 00 | WRENCH ADAPTER, 24 MM | 1 | ||
| 3115 0344 00 | WRENCH ADAPTER, 32 MM | 1 | ||
| 3115 1903 00 | PRESS TOOL FOR FITTING OF PARTS | 1 | ||
| 3115 0329 80 | ASSEMBLY FIXT | 1 | ||
| 3091 0455 90 | EXTRACTOR FOR REMOVING OF PARTS | 1 | ||
| 3115 1897 00 | FIXTURE FOR LOCKING OF PART | 1 | ||
| 3115 1126 00 | ASSEMBLY TOOL | 1 | ||
| 3115 1627 00 | ASSEMBLY TOOL | 1 | ||
| 3115 1628 00 | ASSEMBLY TOOL | 1 | ||
| 3115 1877 00 | ASSEMBLY TOOL | 1 | ||
| 3115 0646 00 | GAS-CYLINDER PRESSURE REGULATOR FOR CHARG | 1 | ||
| 3115 2640 00 | T-NIPPLE TO CONNECT TWO REGULATORS RACCORD EN POUR CONNEXION DE | 1 | ||
| 3115 1821 80 | CHARGING HOSE FOR ACCUMULATOR | 1 | ||
| 3115 1821 00 | HOSE | 1 | ||
| 3115 2075 00 | ADAPTER | 1 | ||
| 3115 0642 00 | NIPPLE | 1 | ||
| 3115 0644 00 | NIPPLE | 1 | ||
| 3115 1632 00 | PRESSURE GAUGE BAR | 1 | ||
| 3115 0284 00 | WASHER FOR LOCKING OF PART | 1 | ||
| 3115 2471 00 | GUIDE RING | 1 | ||
| 3115 1594 00 | PLATE | 2 |
Ürün Özellikleri
- OEM uyumlu tasarım ve spesifikasyonlar
- Premium kalite yedek parça
- Performans ve dayanıklılık testinden geçmiş
- Atlas Copco / Epiroc ekipmanlarıyla uyumlu
- OEM parçalarıyla kıyaslandığında rekabetçi fiyat
- Anında sevkiyat için hazır
Uyumluluk Bilgisi
Bu delme vidası, ROC T15 Yüzey Delme Kulesi ve ilgili Atlas Copco / Epiroc ekipmanları için tasarlanmıştır. Sipariş vermeden önce spesifik ekipman modelinizle uyumluluğu doğrulayın.
Teknik spesifikasyonlar, uyumluluk soruları veya ayrıntılı ürün bilgisi için teknik destek ekibimizle iletişime geçin.
Sipariş Bilgileri
Mevcut Miktar: Stokta Mevcut
Teslim Süresi: 1-2 Gün
Minimum Sipariş: 1 Adet
Toplu İndirim: 10+ adet siparişlerinde geçerli
Özel siparişler veya özel talepler için satış ekibimizle iletişime geçin.
İlgili Ürünler
İlginizi çekebilecek diğer Atlas Copco / Epiroc yedek parçaları:
