В наличии
✓ Available
Atlas Copco COP 2550CR-CRL Hydraulic Rock Drill - 9853 6451 50 / 9853645150
Atlas Copco
Atlas Copco COP 2550CR-CRL hydraulic rock drill. Complete spare parts list with 176 part numbers (catalogue 9853 6451 50). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
Смотреть все Atlas Copco parts
| Совместимый бренд | Atlas Copco |
| Артикул детали | 9853 6451 50 / 9853645150 |
| Номер каталога | 9853 6451 50 |
| Название детали | Rock Drills |
| Модель оборудования | COP 2550CR-CRL |
| Тип продукта | Aftermarket |
| Состояние продукта | New OEM-Quality |
| Происхождение | Turkey |
| Доставка | World-wide |
| Гарантия | 12 Months |
Полный список запчастей 176
Все детали этого перфоратора. Нажмите на номер детали, чтобы запросить цену.
| Поз. | Номер детали | Описание | Кол-во | Примечание |
|---|---|---|---|---|
| 2 | 3115 1457 00 | SIDE BOLT | 1 | |
| 3 | 0663 2101 66 | O-RING | 1 | |
| 4 | 3115 0297 01 | A) SHIM, 0.10 MM | ||
| 4 | 3115 0297 02 | A) SHIM, 0.15 MM | ||
| 4 | 3115 0297 03 | A) SHIM, 0.5 MM | ||
| 5 | 0509 0223 00 | ROLLER BEARING | 1 | |
| 6 | 0667 4111 00 | CUP SEAL | 2 | |
| 3115 3211 80 | ROTATION CHUCK, COMPL | 1 | ||
| 8 | 3115 3087 00 | BUSHING | 1 | |
| 9 | 0509 0221 00 | ROLLER BEARING | 1 | |
| 10 | 3115 3084 00 | ANVIL (CR 89 | 1 | |
| 10 | 3115 3085 00 | ANVIL (CRL 89 | ||
| 3115 2984 80 | GEAR HOUSING, COMPL | 1 | ||
| 12 | 3115 1460 00 | PLUG | 2 | |
| 13 | 0686 4201 03 | PLUG | 1 | |
| 14 | 0653 9038 00 | GASKET | 1 | |
| 15 | 0544 2162 00 | LUBRICATING NIPPLE | 1 | |
| 16 | 0666 7188 01 | SEAL RING | 1 | |
| 17 | 0335 2169 00 | LOCK RING | 1 | |
| 19 | 3115 2968 00 | ROTATION CHUCK BUSHING | 1 | |
| 21 | 0515 3100 13 | NEEDLE BEARING | 2 | |
| 22 | 3115 0823 00 | WASHER | 3 | |
| 23 | 3115 2551 00 | GEAR | 3 | |
| 24 | 3115 2547 00 | INTERMEDIATE SHAFT | 1 | |
| 26 | 3115 2553 00 | BEARING SLEEVE | 1 | |
| 27 | 0516 1504 01 | NEEDLE BEARING | 1 | |
| 29 | 3115 0824 00 | SLEEVE | 1 | |
| 30 | 0667 1206 00 | CUP SEAL | 1 | |
| 31 | 3115 2742 00 | GUIDE SLEEVE | 1 | |
| 33 | 3115 2548 00 | SHAFT | 1 | |
| 34 | 3115 2522 00 | MOTOR BRACKET | 1 | |
| 36 | 0335 2130 00 | CIRCLIP | 2 | |
| 37 | 3115 0277 00 | COUPLING | 2 | |
| 40 | 3115 1454 00 | NUT | 8 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 3115 0821 80 | SHAFT, COMPL | 1 | ||
| 43 | 3115 0823 00 | WASHER | 1 | |
| 44 | 0516 1538 00 | NEEDLE BEARING | 1 | |
| 46 | 0667 1206 00 | CUP SEAL | 1 | |
| 3115 2583 85 | INTERMEDIATE PART, COMPL | 1 | ||
| 0259 2061 00 | THREAD INSERT | 4 | ||
| 0259 0068 00 | THREAD INSERT | 2 | ||
| 50 | 3115 1746 06 | NOZZLE(1211.7MM) | 1 | |
| 51 | 0686 6442 00 | PLUG | 2 | |
| 52 | 0661 1020 00 | SEAL WASHER | 2 | |
| 53 | 3115 1746 15 | NOZZLE (JZI 2,5 MM) | 1 | |
| 55 | 3115 2670 00 | LINER | 1 | |
| 56 | 0663 2104 94 | O-RING | 1 | |
| 57 | 0663 2105 96 | O-RING | 1 | |
| 58 | 0335 3500 10 | LOCK RING | 1 | |
| 65 | 0686 9110 00 | PROTECTIVE PLUG | 2 | |
| 72 | 3176 6517 00 | NIPPLE | 2 | |
| 73 | 3715 0820 00 | CAP | 4 | |
| 74 | 3176 6512 00 | NIPPLE | 2 | |
| 75 | 3176 5313 00 | CAP | 2 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 3115 2972 80 | SEAL HOUSING, COMPL | 1 | ||
| 77 | 3115 2053 00 | SET OF SEALS | 2 | |
| 78 | 0663 6136 00 | O-RING | 1 | |
| 79 | 0663 6143 00 | O-RING | 1 | |
| 80 | 3115 2973 00 | PISTON GUIDE, FRONT) | 1 | |
| 81 | 0663 6135 01 | O-RING | 2 | |
| 82 | 3115 1765 00 | VALVE PISTON | 1 | |
| 83 | 3115 2077 03 | VALVE COVER, LEFT | 1 | |
| 84 | 3115 2076 03 | VALVE COVER, RIGHT | 1 | |
| 85 | 0147 1438 03 | SCREW | 4 | |
| 86 | 3115 3293 00 | REGULATING PLUG | 1 | |
| 88 | 3115 3214 00 | DOME NUT | 1 | |
| 3115 3090 80 | CYLINDER | 1 | ||
| 90 | 3115 1825 00 | PIPE PLUG | 1 | |
| 91 | 0686 6447 04 | PLUG | 2 | |
| 0259 0011 00 | THREAD INSERT | 4 | ||
| 0259 2061 00 | THREAD INSERT | 3 | ||
| 0259 0311 00 | THREAD INSERT | 1 | ||
| 93 | 3115 2112 00 | GUITLE | 1 | |
| 95 | 3115 0286 00 | DOME NUT | 2 | |
| 96 | 3115 0287 00 | WASHER | 2 | |
| 98 | 3115 2981 01 | PISTON | 1 | |
| 100 | 3115 3094 00 | PISTON GUIDE, REAR | 1 | |
| 3115 2976 80 | SEAL HOUSING, COMPL | 1 | ||
| 102 | 3115 2869 00 | SETOFSEALS | 2 | |
| 103 | 0663 6135 00 | O-RING | 1 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 104 | 3115 2977 00 | BACK HEAD | 1 | |
| 105 | 3115 2945 00 | BREATHER | 1 | |
| 106 | 3115 0327 00 | GASKET | 2 | |
| 108 | 3176 6514 00 | NIPPLE (1/2", DRAINAGE) | 1 | |
| 109 | 3715 0597 00 | CAP | 3 | |
| 3115 2570 91 | HOSE SET, COMPL | 1 | ||
| 113 | 3176 6566 00 | NIPPLE | 2 | |
| 114 | 3176 6516 00 | NIPPLE | 2 | |
| 115 | 3715 0589 00 | NIPPLE | 2 | |
| 116 | 3176 6591 00 | NIPPLE | 2 | |
| 117 | 0574 0000 86 | HOSE | 1 | |
| 120 | 3115 3245 00 | SEAR RING | 2 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 1 | 3115 2982 00 | FRONT HEAD | 1 | |
| 2 | 3115 2545 00 | GUIDE | 1 | |
| 4 | 3115 2966 00 | SET OF SEALS | 3 | |
| 5 | 3115 3210 00 | FLUSHING HEAD | 1 | |
| 7 | 0102 0473 00 | CYLINDRICAL PIN | 1 | |
| 3115 2949 80 | COVER, COMPL | 1 | ||
| 9 | 0666 7190 01 | RADIAL LIP SEAL | 1 | |
| 10 | 0335 2173 00 | LOCK RING | 1 | |
| 11 | 3115 0286 00 | DOME NUT | 2 | |
| 12 | 3115 0287 00 | WASHER | 2 | |
| 14 | 0663 2129 01 | O-RING | 1 | |
| 15 | 3115 3209 00 | CONNECTION PLATE | 1 | |
| 16 | 3315 0195 08 | LOCK WASHER | 4 | |
| 18 | 3176 6520 00 | NIPPLE | 1 | |
| 7970 7635 80 | TUBE DRIVER,COMPL. (CR 76) TUBE RACCORD (CR 76) ROHRADAPTER KOMPL. (CR 76) ADAPTADOR DE TUBAS (CR 76) RORADAPTER KOMPL. (CR 76) | 1 | ||
| 7970 7633 80 | TUBE DRIVER,COMPL. (CRL 76) TUBE RACCORD COMPL. (CRL 76) ROHRADAPTER KOMPL. (CRL 76) ADAPTADOR DE TUBOS (CRL 76) RORADAPTER KOMPL. (CRL 76) | 1 | ||
| 7970 8946 80 | TUBE DRIVER,COMPL (CR 89) TUBE RACCORD (CR 89) ROHRADAPTER KOMPL. (CR 89) ADAPTADOR DE TUBAS COMPL (CR 89) R5RADAPTER KOMPL. (CR 89) | 1 | ||
| 7970 8943 80 | TUBE DRIVER,COMPL. (CRL TUBE RACCORD | 1 | ||
| 20 | 7970 8912 00 | ROD GUIDE | 1 | |
| 21 | 7970 8928 80 | COUPLING, COMPL | 1 | |
| 24 | 3176 6512 00 | NIPPLE | 1 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 3115 1010 83 | HYDRAULIC MOTOR | |||
| 3115 1010 93 | SET OF SEALS | 1 | ||
| 7 | 3115 0839 24 | DRAIN PLUG | 1 | |
| 13 | 3115 1010 76 | CHECK VALVE BALL | 2 | |
| 24 | 3115 1010 53 | SCREW | 4 | |
| 3115 2900 80 | ACCUMULATOR | |||
| 2 | 3115 2902 00 | NUT | 1 | |
| 3 | 3115 2903 00 | COMPRESSION SPRING | 1 | |
| 4 | 3115 2901 00 | DIAPHRAGM SUPPORT | 1 | |
| 5 | 3115 2472 00 | DIAPHRAGM | 1 | |
| 7 | 3115 2703 00 | SCREW | 2 | |
| 3115 2196 81 | TEST VALVE | 1 | ||
| 3115 0262 00 | VALVE, COMPL | 1 | ||
| 13 | 3310 4076 00 | CAP | 1 | |
| 14 | 0663 9056 00 | O-RING | 1 | |
| 15 | 3115 2629 00 | SAFETY LABEL | 1 | |
| 16 | 3115 2630 00 | SAFETY LABEL (N2) | 1 | |
| 17 | 3115 2712 00 | DATA LABEL | 1 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 3115 2700 80 | ACCUMULATOR | |||
| 3115 0262 00 | VALVE | 1 | ||
| 5 | 3310 4076 00 | CAP | 1 | |
| 12 | 3115 2630 00 | SAFETY LABEL (N2) | 1 | |
| 13 | 3115 2702 00 | SCREW | 2 | |
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 3115 2615 90 | RETURN ACCUM | |||
| 1 | 3115 1926 02 | DIAPHRAGM | 1 | |
| 3 | 3176 6528 00 | NIPPLE | 1 | |
| 4 | 0661 1038 00 | SEAL RING | 1 | |
| 5 | 0663 2128 00 | O-RING | 1 | |
| 6 | 3115 2618 00 | COVER | 1 | |
| 7 | 3115 2380 00 | FLANGE TUBE | 1 | |
| 9125 6191 00 | O-RING | 1 | ||
| 9 | 0663 9104 01 | O-RING | 2 | |
| 10 | 3115 2379 00 | SEAL | 1 | |
| 13 | 3115 2275 00 | CLAMP | 1 | |
| 14 | 0147 1328 03 | SCREW | 2 | |
| 15 | 0291 2819 00 | LOCK NUT | 2 | |
| 17 | 3715 0589 00 | NIPPLE | 1 | |
| 3115 0262 00 | VALVE, COMPL | |||
| 19 | 3310 4076 00 | CAP | ||
| 20 | 0663 9056 00 | O-RING | ||
| 3115 9157 90 | TORIQUES 3115 9157 90 | |||
| 3115 2859 80 | ASSEMBLY TOOL FOR ACCUMULATOR | |||
| 3115 2859 00 | ASSEMBLY TOOL | |||
| 3115 2860 00 | PIN | 2 | ||
| 3115 2861 00 | RING | |||
| 0266 2114 00 | NUT | 2 | ||
| 3115 2519 00 | TIGHTENING TOOL FOR ACCUMULATOR | |||
| 3115 2900 80 | ACCUMULATOR | |||
| 3115 0976 00 | PRESSURE GAUGE (FOR BOTTLE | |||
| 0371 1102 00 | LIFTING EYE | |||
| 3115 2163 00 | MANDREL FOR FITTING OF PART | |||
| 3115 2736 00 | SPACER PIPE FOR FITTING OF PART 5, PAGE 3 TUBE ENTRETOISE POUR MONTAGE DE LA PIECE DISTANZROHRFUR EINBAU DES TEILS 5, SEITE 3 TUBO DISTANCIADOR PARA MONTAJE DE LA PIEZA. DISTANSRDRFOR MONTERING AV DETAL 5, SID 3 | |||
| 3115 2737 00 | MANDREL FOR FITTING OF PART | |||
| 3115 2263 00 | SPANNER FOR PART (40, PAGE 3) | |||
| 0686 4249 00 | FOR REMOVING OF PARTS | |||
| 3115 2694 00 | MANDREL FOR FITTING OF PART | |||
| 3115 2695 00 | SLEEVE FOR REMOVING OF PART | |||
| 3115 1902 80 | PRESS (BASIC TOOL) COM PL | |||
| 3115 2735 00 | SCREW | |||
| 3115 2734 00 | WING NUT | |||
| 3115 0318 00 | EXTENSION FOR 3115 1902 BO -ALLONGE POUR31151902 BO | |||
| 3115 3003 00 | MANDREL FOR FITTING OF PARTS | |||
| 3115 0313 00 | MANDREL FOR REMOVING OF PARTS | |||
| 3115 3004 00 | MANDREL FOR REMOVING OF PARTS | |||
| 3115 1019 00 | MANDREL FOR REMOVING AND FITTING MANDRIN POUR | |||
| 3115 0343 00 | WRENCH ADAPTER, 24 MM | |||
| 3115 0344 00 | WRENCH ADAPTER, 32 MM | |||
| 3091 0455 90 | EXTRACTOR FOR REMOVING OF PARTS | |||
| 3115 1627 00 | ASSEMBLY TOOL FOR HELI-COIL INSERTS DUTIL DE MONTAGE DES FILETS RAPPORT.ES EINBAUWERKZEUGFUR EINSATZE | |||
| 3115 1628 00 | ASSEMBLY TOOL FOR INSERTS OUTIL DE MONTAGE DES FILETS RAPPORT.ES EINBAUWERKZEUG FUR EINSATZE | |||
| 3115 0646 00 | REGULATORFOR INTAKE ACCUMULATOR REGULATEUR POUR ACCUMULATEUR | |||
| 3115 2075 00 | ADAPTER | |||
| 3115 0642 00 | NIPPLE | |||
| 3115 0644 00 | NIPPLE | |||
| 3115 1632 00 | PRESSURE GAUGE 0-250 BAR | |||
| 3115 0284 00 | WASHER FOR LOCKING OF PART | |||
| 3115 2471 00 | GUIDE RING |
Характеристики продукта
- Конструкция и характеристики, совместимые с OEM
- Высококачественный послепродажный компонент
- Протестировано на производительность и долговечность
- Совместимо с оборудованием Atlas Copco / Epiroc
- Конкурентные цены по сравнению с оригинальными деталями OEM
- Доступно для немедленной отгрузки
Информация о совместимости
Этот буровой винт предназначен для бурового станка ROC T15 и связанного оборудования Atlas Copco / Epiroc. Пожалуйста, проверьте совместимость с вашей конкретной моделью оборудования перед оформлением заказа.
Для получения технических характеристик, вопросов о совместимости или подробной информации о продукте, пожалуйста, свяжитесь с нашей службой технической поддержки.
Информация о заказе
Доступное количество: В наличии
Срок изготовления: 1–2 дня
Минимальный заказ: 1 единица
Оптовые скидки: Доступны при заказе от 10 единиц
Свяжитесь с нашим отделом продаж для нестандартных заказов или специальных запросов.
Похожие продукты
Другие запасные части Atlas Copco / Epiroc, которые могут вас заинтересовать:
