Stokta Var
✓ Available
Sandvik HL 1560T Hydraulic Rock Drill - 550 361 29 / 55036129
Sandvik
Sandvik HL 1560T hydraulic rock drill. Complete spare parts list with 285 part numbers (catalogue 550 361 29). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Uyumlu Marka | Sandvik |
| Referans Parça Numarası | 550 361 29 / 55036129 |
| Katalog No. | 550 361 29 |
| Parça Adı | Rock Drills |
| Ekipman Modeli | HL 1560T |
| Ürün Tipi | Aftermarket |
| Ürün Durumu | New OEM-Quality |
| Menşei | Turkey |
| Teslimat | World-wide |
| Garanti | 12 Months |
Eksiksiz Parça Listesi 285
Bu tabancanın tüm parçaları. Teklif almak için parça numarasına tıklayın.
| Poz | Parça Numarası | Tanım | Adet | Açıklama |
|---|---|---|---|---|
| 550 361 29 | ROCK DRILL, HL1560T-80, OMT500, AIR FLUSHING | |||
| 154 041 52 | FLUSHING DEVICE ASSY., AIR FLUSHING, D80 | |||
| 097 344 48 | PRESSURE ACCUMULATOR, 0,3DM3, 4BAR | |||
| 097 343 18 | PRESSURE ACCUMULATOR, 0,3DM3, 50BAR | |||
| 154 044 38 | MOTOR ASSEMBLY, HYDRAULIC, OMT500 | |||
| 550 642 39 | ACCUMULATOR | |||
| 550 387 95 | TOOL KIT, HL1560T | |||
| 093 333 78 | TOOL KIT | |||
| 550 358 60 | HOUSING | |||
| 550 358 96 | SPACER/ ROCK DRILL | |||
| 551 916 85 | SHANK LUBRICATION UNIT, SHANK LUBRICATION FOR DPI | |||
| 551 922 71 | TANK ASSEMBLY, SHANK LUBRICATION | |||
| 551 916 92 | COVER ASSEMBLY, SLU | |||
| 552 113 61 | PUMP ASSEMBLY, SHANK LUBRICATION | |||
| 551 746 40 | PUMP UNIT, 2.00CM3/STROKE, MASTER UNIT | |||
| 550 361 29 | DA | |||
| 550 361 29 | DA | |||
| 550 361 29 | DA | |||
| 2 | 550 358 96 | SPACER/ ROCK DRILL | 1 | SECTION 6 PAGE 19 |
| 3 | 550 358 60 | HOUSING | 1 | SECTION 6 PAGE 18 |
| 4 | 154 041 52 | FLUSHING DEVICE ASSY | 1 | SECTION 6 PAGE 8 |
| 7 | 151 679 38 | CAP NUT | 4 | M27x2 |
| 8 | 550 379 11 | SIDE BOLT | 4 | M27x2 |
| 10 | 154 020 08 | PIN | 1 | - |
| 11 | 550 347 96 | DRIVER (BRONZE) | 1 | - |
| 12 | 150 620 38 | GEAR WHEEL ASSEMBLY | 1 | - INCL. PARTS 12.2 |
| 816 132 79 | NEEDLE BEARING | 2 | D50 d40 L30 | |
| 13 | 150 609 68 | RING, SLIP | 2 | - |
| 14 | 550 348 41 | BUSHING, ROTATION | 1 | - INCL. PARTS 14.2 |
| 550 350 50 | BEARING | 1 | D105 d100 L67.5 | |
| 15 | 550 352 26 | CHUCK | 1 | - |
| 20 | 154 044 38 | MOTOR ASSEMBLY, HYDRAULIC | 1 | SECTION 6 PAGE 11 |
| 31 | 850 687 49 | WASHER, LOCK, DOUBLE | 2 | M16 |
| 34 | 851 283 39 | WASHER, LOCK, DOUBLE | 4 | M20 |
| 35 | 801 777 39 | NUT, LOCK | 4 | M24 |
| 36 | 800 551 99 | HEXAGON HEAD BOLT | 4 | M24X120 |
| 37 | 800 538 69 | HEXAGON HEAD SCREW | 2 | M16X45 |
| 38 | 800 658 09 | O-RING | 1 | 74.5x3.00 |
| 39 | 522 131 00 | O-RING | 3 | 34.2x3.00 |
| 40 | 806 520 99 | O-RING | 2 | 149.5x3.00 |
| 44 | 800 448 49 | HEXAGON HEAD SCREW | 4 | M20x50 |
| 48 | 550 126 00 | SCREW, RETAINER | 1 | M16 |
| 63 | 817 227 39 | PLUG | 4 | JIC 1 5/16-12 |
| 69 | 851 284 69 | WASHER, LOCK, DOUBLE | 4 | M24 |
| 70 | 801 031 49 | BONDED SEAL | 1 | U 17.4x24x1.5 |
| 71 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | G 1/2 x JIC 3/4-16 |
| 79 | 817 097 49 | PLUG | 1 | JIC 3/4-16 |
| 82 | 151 739 28 | CONNECTION PIECE | 1 | - |
| 83 | 853 533 99 | O-RING | 2 | 27.3x2.40 |
| 84 | 800 527 29 | HEXAGON HEAD SCREW | 4 | M10x50 |
| 85 | 851 282 09 | WASHER, LOCK, DOUBLE | 4 | M10 |
| 113 | 816 760 09 | STRAIGHT THREAD ADAPTER | 2 | G 3/4 x JIC 1 5/16-12 |
| 550 391 15 | SEAL KIT | 1 | - INCL. PARTS 28-29, 38-41, 46-47, 49-50, | |
| 550 387 95 | TOOL KIT | 1 | SECTION 6 PAGE 14 | |
| 550 361 29 | DA | |||
| 550 361 29 | DA | |||
| 1 | 550 365 35 | FRAME | 1 | - |
| 2 | 550 358 96 | SPACER/ ROCK DRILL | 1 | SECTION 6 PAGE 19 |
| 5 | 097 344 48 | PRESSURE ACCUMULATOR | 2 | SECTION 6 PAGE 9 |
| 6 | 097 343 18 | PRESSURE ACCUMULATOR | 2 | SECTION 6 PAGE 10 |
| 7 | 151 679 38 | CAP NUT | 4 | M27x2 |
| 16 | 550 354 19 | PISTON, STABILIZER | 1 | - INCL. PARTS 16.2 |
| 550 350 49 | BUSHING | 1 | D109 d94 L26 | |
| 17 | 550 348 12 | PISTON, STABILIZER | 1 | - |
| 18 | 550 358 97 | RING | 1 | - INCL. PARTS 18.2 |
| 550 350 48 | BEARING BUSHING | 1 | D105 d100 L26 | |
| 21 | 550 352 19 | CYLINDER | 1 | - |
| 22 | 302 947 28 | PISTON | 1 | L=790 |
| 23 | 153 603 28 | DISTRIBUTOR | 1 | - |
| 24 | 550 373 97 | CYLINDER | 1 | - INCL. PARTS 24.2 |
| 803 881 29 | SPRING-TYPE STRAIGHT PIN | 1 | 3X16 | |
| 25 | 151 655 08 | BUSHING | 1 | - |
| 26 | 151 668 08 | HOUSING, SEAL | 1 | - |
| 27 | 551 920 90 | COVER, REAR | 1 | - |
| 28 | 814 780 09 | O-RING | 2 | 72.0x3.00 |
| 29 | 855 968 89 | O-RING | 2 | 30.2x3.00 90ShA |
| 30 | 802 198 29 | HEXAGON HEAD BOLT | 16 | M16x70 |
| 31 | 850 687 49 | WASHER, LOCK, DOUBLE | 19 | M16 |
| 34 | 851 283 39 | WASHER, LOCK, DOUBLE | 6 | M20 |
| 38 | 800 658 09 | O-RING | 1 | 74.5x3.00 |
| 41 | 870 533 19 | O-RING | 1 | 170.0x3.00 |
| 46 | 151 917 08 | SEAL | 1 | s0.5 |
| 47 | 802 441 79 | O-RING | 2 | 139.5x3.00 |
| 49 | 852 756 39 | SEAL, ROD | 2 | d65 |
| 50 | 800 119 69 | O-RING | 5 | 99.5x3.00 |
| 51 | 863 217 29 | HEXAGON HEAD BOLT | 3 | M16X60 10.9 |
| 52 | 428 702 10 | O-RING | 1 | 49.5x3.00 |
| 53 | 550 642 39 | ACCUMULATOR | 1 | SECTION 6 PAGE 12 |
| 54 | 134 934 18 | HOLE SCREW | 2 | R 1 1/4" |
| 55 | 800 350 09 | BONDED SEAL | 4 | 42.7x53x3 |
| 56 | 136 964 68 | BANJO | 2 | G1" |
| 58 | 151 859 78 | ADAPTER | 1 | G 1" x JIC 1 5/16-12, d10 |
| 59 | 800 349 49 | USIT-SEAL | 1 | U d34,3xD43xs2 SC |
| 60 | 852 755 09 | SEAL, ROD | 2 | d55 |
| 61 | 819 532 09 | O-RING | 1 | 64.5x3.00 |
| 62 | 816 700 59 | STRAIGHT THREAD ADAPTER | 1 | G 1 x JIC 1 5/16-12 |
| 63 | 817 227 39 | PLUG | 4 | JIC 1 5/16-12 |
| 64 | 800 118 39 | O-RING | 1 | 79.5x3.00 |
| 65 | 817 257 69 | O-RING | 1 | 190.0x3.00 |
| 66 | 801 517 29 | O-RING | 1 | 104.5x3.00 |
| 67 | 800 975 29 | HEXAGON HEAD SCREW | 6 | M20x1.5x75 |
| 68 | 151 883 38 | SEAL | 4 | s0.5 |
| 550 391 15 | SEAL KIT | 1 | - INCL. PARTS 28-29, 38-41, 46-47, 49-50, | |
| 550 387 95 | TOOL KIT | 1 | SECTION 6 PAGE 14 | |
| 154 041 52 | AAA | |||
| 154 041 52 | AAA | |||
| 1 | 303 730 88 | FLUSHING HOUSING | 1 | - INCL. PARTS 1.2-1.3 |
| 810 183 99 | PLUG | 1 | G3/8 | |
| 881 139 09 | PLUG | 1 | G3/8 | |
| 2 | 154 035 58 | FLANGE | 1 | - INCL. PARTS 2.2 |
| 152 387 18 | BEARING BUSHING | 1 | D95 d80 L80.5 | |
| 4 | 154 036 88 | HOUSING, SEAL | 1 | - |
| 5 | 154 147 48 | FITTING, FLANGE | 1 | R1" |
| 6 | 816 710 69 | STRAIGHT THREAD ELBOW | 1 | G 1 x JIC 1 5/16-12 |
| 7 | 817 227 39 | PLUG | 1 | JIC 1 5/16-12 |
| 8 | 804 094 09 | O-RING | 5 | 114.5x3.00 |
| 9 | 853 189 99 | SEAL | 5 | d80 |
| 10 | 442 218 50 | HEXAGON HEAD SCREW | 6 | M16x40 |
| 11 | 850 687 49 | WASHER, LOCK, DOUBLE | 6 | M16 |
| 12 | 522 131 00 | O-RING | 1 | 34.2x3.00 |
| 13 | 522 113 40 | O-RING | 1 | 29.2x3.00 |
| 14 | 150 616 98 | PLATE, GASKET | 1 | s 1.0 |
| 15 | 817 097 49 | PLUG | 1 | JIC 3/4-16 |
| 16 | 817 098 79 | STRAIGHT THREAD ELBOW | 1 | G 1/2 x JIC 3/4-16 |
| 17 | 806 520 99 | O-RING | 1 | 149.5x3.00 |
| 18 | 152 417 88 | PLATE, GASKET | 1 | s=1.0 mm |
| 19 | 152 450 28 | PLATE, GASKET | 1 | s=1.0 mm |
| 20 | 154 040 28 | RETAINER RING PAIR | 1 | - |
| 884 942 79 | SEAL KIT | 1 | INCL.PARTS 8,9, INCL. PARTS 8-9, 12-14, | |
| 097 344 48 | BE | |||
| 3 | 092 602 98 | DIAPHRAGM | 1 | Stemless type, D120 |
| 4 | 807 590 69 | VALVE | 1 | Thread 1/2-20 UNJF-3A |
| 869 733 29 | O-RING | 1 | 14.0x2.00 | |
| 851 682 19 | PROTECTING CAP | 1 | Vg8 Av3/8" | |
| 5 | 522 134 90 | O-RING | 1 | 129.5X3.00 |
| 7 | 151 548 58 | SIGN | 1 | NOT PRESSURIZED |
| 9 | 819 532 09 | O-RING | 1 | 64.5x3.00 |
| 085 370 18 | CAP, PROTECTING | 1 | D28, L34, RUBBER | |
| 097 343 18 | ACCUMULATOR | cE | ||
| 3 | 092 602 98 | DIAPHRAGM | 1 | Stemless type, D120 |
| 4 | 807 590 69 | VALVE | 1 | Thread 1/2-20 UNJF-3A |
| 869 733 29 | O-RING | 1 | 14.0x2.00 | |
| 851 682 19 | PROTECTING CAP | 1 | Vg8 Av3/8" | |
| 5 | 522 134 90 | O-RING | 1 | 129.5X3.00 |
| 7 | 151 548 58 | SIGN | 1 | NOT PRESSURIZED |
| 8 | 819 532 09 | O-RING | 1 | 64.5x3.00 |
| 085 370 18 | CAP, PROTECTING | 1 | D28, L34, RUBBER | |
| 154 044 38 | MOTOR ASSEMBLY, HYDRAULIC | |||
| 1 | 883 451 09 | HYDRAULIC MOTOR | 1 | OMTS500 |
| 2 | 303 737 78 | HOUSING, BEARING | 1 | - |
| 3 | 514 015 60 | NUT, LOCK | 1 | - |
| 4 | 514 411 60 | WASHER, LOCK | 1 | - |
| 5 | 855 464 39 | BEARING, SPHERICAL, ROLLER | 1 | D100 d55 L25 |
| 6 | 800 957 69 | CIRCLIP | 2 | 85X3 |
| 7 | 154 023 98 | COVER | 1 | - |
| 8 | 800 470 59 | HEXAGON HEAD SCREW | 4 | M12x30 |
| 9 | 851 068 09 | WASHER, LOCK, DOUBLE | 4 | M12 |
| 10 | 302 827 88 | SHAFT, ROTATING | 1 | - |
| 11 | 150 613 08 | THRUST | 1 | - |
| 12 | 883 983 29 | SEAL, SHAFT | 2 | d 65 |
| 13 | 522 135 10 | O-RING | 1 | 134.5X3.00 |
| 14 | 801 496 49 | O-RING | 1 | 94.5X3.00 |
| 871 667 99 | BEARING, ROLLER | 1 | SKF NJ 2208 | |
| 867 666 99 | SEAL KIT | 1 | - INCL. PARTS 12, 14 | |
| 550 642 39 | ACCUMULATOR | a | ||
| 3 | 041 148 08 | DIAPHRAGM | 1 | Stemless type, D113 |
| 4 | 807 590 69 | VALVE | 1 | Thread 1/2-20 UNJF-3A |
| 869 733 29 | O-RING | 1 | 14.0x2.00 | |
| 851 682 19 | PROTECTING CAP | 1 | Vg8 Av3/8" | |
| 5 | 151 548 58 | SIGN | 1 | NOT PRESSURIZED |
| 6 | 085 370 18 | CAP, PROTECTING | 1 | D28, L34, RUBBER |
| 7 | 800 816 79 | O-RING | 1 | 124.5X3.00 |
| 550 391 15 | SEAL KIT | - INCL. PARTS 4.1, 7 | ||
| 550 387 95 | C | |||
| 550 387 95 | C | |||
| 1 | 150 671 08 | PUNCH | 1 | D90, L20 |
| 2 | 150 672 38 | PUNCH | 1 | D115, L20 |
| 3 | 150 673 68 | PUNCH | 1 | D85, L9 |
| 4 | 150 674 98 | PUNCH | 1 | D153, L20, M16 |
| 5 | 150 675 18 | PUNCH | 1 | D60, L130 |
| 6 | 150 676 48 | PUNCH | 1 | D102, L50 |
| 7 | 150 677 78 | PUNCH | 1 | D144.5, L65 |
| 11 | 090 300 38 | GAUGE, PRESSURE | 1 | (0-100 bar) |
| 12 | 090 845 48 | GAUGE, PRESSURE | 1 | (0-10 bar) |
| 13 | 869 598 69 | SEAL | 2 | - |
| 14 | 550 384 97 | PUNCH | 1 | D112, L138 |
| 15 | 152 495 08 | PUNCH | 1 | D165, L101 |
| 16 | 152 496 28 | PUNCH | 1 | D160, L15 |
| 17 | 152 497 58 | PUNCH | 1 | D65, L100 |
| 18 | 152 498 88 | PUNCH | 1 | D44.5, L240, M16 |
| 19 | 154 830 38 | PEDESTAL | 1 | - |
| 20 | 302 878 58 | BRACKET, MOUNTING | 1 | - |
| 21 | 092 864 58 | HAMMER | 1 | Slide hammer, M16, 1.1kg |
| 22 | 153 936 18 | FILLING DEVICE | 1 | Inlet thread W24,32X1/14 |
| 810 791 09 | PRESSURE REDUCING VALVE | 1 | 200/100 bar N2 | |
| 152 280 08 | HOSE ASSEMBLY | 1 | - | |
| 23 | 096 904 68 | BRACKET | 1 | 200x40x85 |
| 25 | 449 698 00 | LUG, LIFTING | 1 | M20 |
| 26 | 833 710 99 | HOOK SET | 1 | - |
| 27 | 152 501 38 | TOOL | 1 | D120, L32 |
| 28 | 151 806 48 | OPENER | 1 | D118, L47 |
| 29 | 095 170 98 | STAND | 1 | D190, L90 |
| 30 | 093 333 78 | TOOL KIT | 1 | SECTION 6 PAGE 15 |
| 31 | 151 738 08 | EXTENSION BAR | 1 | D50, L265, Male M22, Female M20 |
| 32 | 150 684 08 | PIN | 1 | 77x15x12 |
| 33 | 152 507 08 | FLUSHING PLATE | 1 | 166x163x38 |
| 34 | 150 169 88 | PUNCH | 1 | D68, L45, M22 |
| 35 | 150 702 08 | PLATE | 1 | D102, L20 |
| 36 | 088 257 98 | SCREW, EXTRACTOR | 1 | Hex24, L92, Male M10, Female M16 |
| 38 | 152 537 28 | PUNCH | 1 | D100, L23 |
| 42 | 550 056 19 | PUNCH | 1 | D80, L165, M22 |
| 43 | 550 371 57 | PUNCH | 1 | D108, L120 |
| 44 | 550 371 59 | PUNCH | 1 | D115, L107 |
| 45 | 550 371 60 | PUNCH | 1 | D115, L107 |
| 46 | 550 371 61 | PUNCH | 1 | D139.8, L30 |
| 47 | 550 371 63 | PUNCH | 1 | D96.8, L140 |
| 48 | 550 371 65 | PUNCH | 1 | D149.8, L70 |
| 49 | 550 387 71 | PUNCH | 1 | D67.5, L10, M22 |
| 50 | 150 746 48 | GAGE | 1 | D36, L4.37 |
| 51 | 550 550 64 | PUNCH | 1 | D129, L30, M22 |
| 551 884 93 | LUG, LIFTING | 2 | M16x24 | |
| 551 897 48 | LUG, LIFTING | 2 | M16 | |
| 550 420 18 | FIELD SERVICE TOOL KIT | 42 | HL1560T INCL. PARTS 1-3, 22-23, 26-31, 1 | |
| 093 333 78 | C | |||
| 1 | 870 492 19 | TORQUE WRENCH | 1 | 80 - 400 Nm, 3/4 |
| 2 | 870 493 49 | WRENCH, SOCKET | 1 | 19, 3/4 |
| 3 | 870 494 79 | WRENCH, SOCKET | 1 | 22, 3/4 |
| 4 | 870 495 09 | WRENCH, SOCKET | 1 | 24 3/4 |
| 5 | 870 496 29 | WRENCH, SOCKET | 1 | 30, 3/4 |
| 6 | 870 497 59 | WRENCH, SOCKET | 1 | 36, 3/4 |
| 7 | 870 498 89 | SPANNER, RING | 1 | 19 |
| 8 | 870 499 09 | SPANNER, RING | 1 | 24 |
| 9 | 870 500 09 | SPANNER, RING | 1 | 27 |
| 10 | 870 501 39 | SPANNER, RING | 1 | 30 |
| 11 | 870 503 99 | SPANNER, RING | 1 | 41 |
| 12 | 870 504 19 | RECOILLESS HAMMER | 1 | Plastic, 50 mm |
| 13 | 870 513 09 | RING INSERT TOOL | 1 | 19 |
| 14 | 880 976 79 | RING INSERT TOOL | 1 | 24 |
| 550 500 13 | TORQUE WRENCH | 1 | 160-800 Nm | |
| 550 358 60 | EA | |||
| 550 358 60 | HOUSING | eA | ||
| 2 | 550 521 81 | BUSHING | 1 | - INCL. PARTS 2.2-2.3 |
| 550 521 62 | BUSHING | 1 | D135 d125 L39 | |
| 800 080 59 | SPRING-TYPE STRAIGHT PIN | 2 | 8X16 | |
| 3 | 853 231 59 | BUSHING, BEARING | 1 | D155 d150 L60 |
| 4 | 152 362 68 | BUSHING | 3 | D45 d40 L39.5 |
| 5 | 871 667 99 | BEARING, ROLLER | 1 | SKF NJ 2208 |
| 6 | 800 537 39 | HEXAGON HEAD SCREW | 7 | M16x35 |
| 7 | 152 372 78 | GLAND | 1 | - |
| 8 | 883 981 79 | SEAL | 1 | d=60 |
| 9 | 800 658 09 | O-RING | 1 | 74.5x3.00 |
| 10 | 422 285 80 | CIRCLIP | 1 | 80X2,5 |
| 11 | 152 414 08 | COVER | 1 | - |
| 12 | 850 687 49 | WASHER, LOCK, DOUBLE | 7 | M16 |
| 13 | 869 751 99 | O-RING | 2 | 156.0x3.00 |
| 14 | 550 360 90 | SEAL, ROD | 1 | d 100 |
| 16 | 855 968 89 | O-RING | 8 | 30.2x3.00 90ShA |
| 17 | 551 994 84 | O-RING | 1 | 300x3 |
| 18 | 804 379 09 | O-RING | 1 | 209.5x3.00 |
| 21 | 550 361 86 | O-RING | 1 | 8.0x3.00 |
| 22 | 857 318 99 | O-RING | 1 | 14.5x3.00 |
| 23 | 881 140 79 | PLUG | 2 | G1/2 |
| 24 | 881 139 09 | PLUG | 1 | G3/8 |
| 25 | 865 683 09 | PLUG | 1 | G1/8 |
| 26 | 801 811 49 | PLUG | 1 | G1/8 |
| 27 | 810 183 99 | PLUG | 1 | G3/8 |
| 28 | 881 142 29 | PLUG | 2 | G1 |
| 550 358 96 | DB | |||
| 2 | 550 351 52 | RING | 1 | - |
| 4 | 801 849 99 | SPRING-TYPE STRAIGHT PIN | 2 | 16X40 |
| 6 | 808 152 89 | PLUG | 2 | G3/8 |
| 8 | 801 031 49 | BONDED SEAL | 2 | U 17.4x24x1.5 |
| 9 | 550 262 05 | O-RING | 1 | 17.2x3.00 |
| 10 | 819 533 39 | O-RING | 1 | 24.2X3.00 90 ShA |
| 11 | 855 968 89 | O-RING | 8 | 30.2x3.00 90ShA |
| 12 | 800 119 69 | O-RING | 2 | 99.5x3.00 |
| 13 | 550 152 17 | O-RING | 1 | 245.0x3.00 |
| 14 | 800 816 79 | O-RING | 1 | 124.5X3.00 |
| 15 | 871 692 89 | PLUG | 1 | G1/4 |
| 17 | 522 450 80 | O-RING | 1 | 119.5x3.00 |
| 19 | 550 360 89 | SEAL, ROD | 1 | d 94 |
| 20 | 550 350 52 | BUSHING | 1 | D102 d94 L22.5 |
| 21 | 550 350 51 | BUSHING | 1 | D148 d140 L56 |
| 23 | 817 094 69 | STRAIGHT THREAD ADAPTER | 2 | G 1/2 x JIC 3/4-16 |
| 24 | 817 097 49 | PLUG | 2 | JIC 3/4-16 |
| 25 | 865 815 59 | O-RING | 2 | 19.2x3.00 90 ShA |
| 26 | 550 403 36 | ORIFICE | 1 | G1/8 , d2 |
| 551 916 85 | A | |||
| 551 916 85 | SHANK LUBRICATION UNIT, SHANK LUBRICATION FOR DPI | a | ||
| 1 | 551 922 71 | TANK ASSEMBLY | 1 | SECTION 6 PAGE 24 |
| 2 | 552 113 61 | PUMP ASSEMBLY | 1 | SECTION 6 PAGE 28 |
| 3 | 280 674 80 | CLAMP | 2 | 28 |
| 4 | 800 192 49 | HEXAGON HEAD SCREW | 2 | M10 X 30 - 8.8 |
| 5 | 550 130 58 | WASHER, LOCK, DOUBLE | 14 | M10 |
| 6 | 284 773 10 | NUT, LOCK | 6 | M10 - 8, Zn |
| 7 | 800 535 89 | HEXAGON HEAD BOLT | 1 | M12x80 - 8.8 |
| 8 | 851 068 09 | WASHER, LOCK, DOUBLE | 2 | M12 |
| 9 | 811 260 29 | NUT, LOCK | 2 | M12 |
| 158 | 888 137 19 | PROTECTIVE HOSE | R3-019Blue 0.2 | |
| 551 922 71 | AA | |||
| 551 922 71 | AA | |||
| 1 | 551 808 61 | RESERVOIR | 1 | 58 L |
| 2 | 551 922 85 | FIXING CLIP | 1 | FIXING CLIP, LONG FOR SLU |
| 3 | 551 922 91 | RUBBER PROFILE | 1 | |
| 4 | 551 916 92 | COVER ASSEMBLY | 1 | SECTION 6 PAGE 26 |
| 5 | 551 875 96 | SIGHT INDICATOR, LEVEL | 1 | |
| 6 | 816 096 09 | PLUG | 2 | M12X1,5 m8.8 DIN 908 |
| 7 | 801 802 69 | BONDED SEAL | 2 | U d13,7xD22xs1,5 SC |
| 8 | 800 917 29 | NUT, HEXAGON | 4 | M8 m8 |
| 9 | 851 281 89 | WASHER, LOCK, DOUBLE | 4 | M8 |
| 10 | 850 809 89 | FLANGE | 1 | 3/4" |
| 550 987 88 | O-RING | 1 | 22.0x2.5, NBR, 90 SHORE A | |
| 11 | 550 385 87 | FITTING | 1 | R3/4"x19mm |
| 13 | 801 657 99 | HEXAGON SOCKET HEAD SCREW | 2 | M6X40 m8.8 |
| 14 | 445 716 60 | HEXAGON SOCKET HEAD SCREW | 2 | M6x60 |
| 15 | 853 239 79 | WASHER, LOCK, DOUBLE | 4 | M6 |
| 16 | 283 356 60 | SEAL, COPPER | 1 | 27x32x2 |
| 17 | 812 607 89 | PLUG | 1 | G3/4" |
| 18 | 551 922 80 | PEDESTAL | 2 | PEDESTAL FOR SLU TANK |
| 19 | 551 922 81 | SUPPORTING BLOCK | 1 | SUPPORTIN BLOCK FOR SLU |
| 20 | 551 922 83 | DAMPER, VIBRATION | 5 | VIBRATION DAMPER FOR SLU TANK |
| 21 | 551 922 87 | FIXING CLIP | 2 | FIXING CLIP SHORT, SLU |
| 22 | 551 922 88 | RUBBER PROFILE | 2 | RUBBER PROFILE FOR SLU PEDESTAL |
| 23 | 551 922 90 | RUBBER PROFILE | 2 | |
| 551 916 92 | BA | |||
| 551 916 92 | BA | |||
| 1 | 551 921 65 | WELDING ASSEMBLY | 1 | SLU Cover, welding assemby |
| 2 | 551 796 27 | CAP, FILLING | 1 | |
| 552 104 23 | BREATHER ASSEMBLY | 1 | For SLU tank | |
| 3 | 284 332 40 | HEXAGON HEAD BOLT | 6 | M5x20 - 8.8 |
| 4 | 550 770 58 | WASHER, LOCK, DOUBLE | 12 | M5 NORD-LOCK |
| 5 | 800 471 89 | NUT, HEXAGON | 6 | M5-8 |
| 6 | 551 925 50 | GAUGE, LEVEL | 1 | Level gauge 3 level |
| 7 | 551 849 80 | SEAL, RUBBER | 1 | |
| 8 | 552 220 92 | MOUNTING | 1 | Connector for SLU oil level sensor |
| 552 113 61 | PUMP ASSEMBLY, SHANK LUBRICATION | |||
| 552 113 61 | PUMP ASSEMBLY, SHANK LUBRICATION | |||
| 1 | 551 746 40 | PUMP UNIT | 1 | SECTION 6 PAGE 30 |
| 2 | 551 812 37 | SUPPORTING BLOCK | 1 | PUMP UNIT |
| 3 | 816 770 19 | STRAIGHT THREAD ADAPTER | 2 | G 1/2 in x JIC 1 1/16-12 |
| 4 | 812 605 29 | PLUG | 1 | G 1/2 in |
| 5 | 800 347 99 | BONDED SEAL | 1 | U-SEAL |
| 6 | 550 385 87 | FITTING | 1 | R3/4"x19mm |
| 7 | 283 356 60 | SEAL, COPPER | 1 | 27x32x2 |
| 8 | 810 491 29 | PLUG | 1 | R1/2 in |
| 9 | 853 533 99 | O-RING | 1 | 27.3x2.40 |
| 10 | 313 829 70 | HEXAGON SOCKET HEAD SCREW | 3 | M8X70 m8.8 |
| 11 | 550 160 42 | WASHER, LOCK, DOUBLE | 3 | M8 NORD-LOCK sp |
| 12 | 800 917 29 | NUT, HEXAGON | 3 | M8 m8 |
| 13 | 816 702 09 | STRAIGHT THREAD ADAPTER | 1 | JIC 9/16-18 |
| 14 | 887 315 99 | STRAIGHT THREAD ADAPTER | 2 | 6F40MXS (9/16-18JIC) |
| 551 746 40 | BA | |||
| 551 746 40 | BA | |||
| 1 | 551 746 71 | FRAME | 1 | Lubrication pump body |
| 2 | 551 746 70 | VALVE, CHECK | 1 | |
| 3 | 551 746 68 | VALVE, CHECK | 1 | |
| 4 | 551 746 67 | INDICATOR | 1 | Flow indicator |
| 5 | 551 746 54 | PISTON | 1 | Piston assembly, 2.00cm3/stroke |
| 552 022 76 | SEAL KIT | 1 | Seal kit for pump piston seals | |
| 6 | 551 746 53 | SCREW | 1 | |
| 8 | 551 746 52 | VALVE, DIRECTIONAL | 1 | 3/2 DIRECTIONAL VALVE |
| 9 | 551 746 51 | COIL | 1 | |
| 10 | 550 727 76 | ORIFICE | 1 | 0,6 M6 |
| 11 | 551 746 47 | SCREW | 1 | M6X8 |
| 12 | 551 746 45 | SEAL | 1 | Seal for lubrication pump, U6,7X10,0X1 |
| 13 | 551 871 59 | SCREW | 1 | Screw plug |
| 14 | 065 744 06 | NUT, HEXAGON | 1 | M6 - 8 |
| 15 | 332 975 18 | CAP NUT | 1 | M6 - 6 |
| 16 | 551 746 44 | SEAL KIT | 1 | |
| 551 993 38 | TOOL, MOUNTING | 1 | Assembly tool for SLU-pump piston seals |
Ürün Özellikleri
- OEM uyumlu tasarım ve spesifikasyonlar
- Premium kalite yedek parça
- Performans ve dayanıklılık testinden geçmiş
- Atlas Copco / Epiroc ekipmanlarıyla uyumlu
- OEM parçalarıyla kıyaslandığında rekabetçi fiyat
- Anında sevkiyat için hazır
Uyumluluk Bilgisi
Bu delme vidası, ROC T15 Yüzey Delme Kulesi ve ilgili Atlas Copco / Epiroc ekipmanları için tasarlanmıştır. Sipariş vermeden önce spesifik ekipman modelinizle uyumluluğu doğrulayın.
Teknik spesifikasyonlar, uyumluluk soruları veya ayrıntılı ürün bilgisi için teknik destek ekibimizle iletişime geçin.
Sipariş Bilgileri
Mevcut Miktar: Stokta Mevcut
Teslim Süresi: 1-2 Gün
Minimum Sipariş: 1 Adet
Toplu İndirim: 10+ adet siparişlerinde geçerli
Özel siparişler veya özel talepler için satış ekibimizle iletişime geçin.
İlgili Ürünler
İlginizi çekebilecek diğer Atlas Copco / Epiroc yedek parçaları:
