Stokta Var
✓ Available
Sandvik HL 710 Hydraulic Rock Drill - 550 740 57 / 55074057
Sandvik
Sandvik HL 710 hydraulic rock drill. Complete spare parts list with 174 part numbers (catalogue 550 740 57). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Uyumlu Marka | Sandvik |
| Referans Parça Numarası | 550 740 57 / 55074057 |
| Katalog No. | 550 740 57 |
| Parça Adı | Rock Drills |
| Ekipman Modeli | HL 710 |
| Ürün Tipi | Aftermarket |
| Ürün Durumu | New OEM-Quality |
| Menşei | Turkey |
| Teslimat | World-wide |
| Garanti | 12 Months |
Eksiksiz Parça Listesi 174
Bu tabancanın tüm parçaları. Teklif almak için parça numarasına tıklayın.
| Poz | Parça Numarası | Tanım | Adet | Açıklama |
|---|---|---|---|---|
| 550 740 57 | ROCK DRILL | |||
| 302 898 71 | FLUSHING DEVICE ASSEMBLY | |||
| 154 127 24 | HYDR. MOTOR ASSY | |||
| 302 897 41 | HOUSING ASSEMBLY | |||
| 550 348 89 | SPACER/ ROCK DRILL | |||
| 154 045 68 | PRESSURE ACCUMULATOR | |||
| 154 046 98 | PRESSURE ACCUMULATOR | |||
| 150 730 78 | TOOL SET | |||
| 550 740 57 | BB | |||
| 550 740 57 | BB | |||
| 550 740 57 | BB | |||
| 2 | 302 897 41 | HOUSING ASSEMBLY | 1 | SECTION 6 PAGE 11 |
| 5 | 550 348 89 | SPACER/ ROCK DRILL | 1 | SECTION 6 PAGE 12 |
| 6 | 550 358 76 | ROTATION BUSHING | 1 | INCL. PART 6.1 |
| 152 518 38 | DRILL SLEEVE | 1 | ||
| 15 | 090 475 68 | GEAR WHEEL | 1 | INCL. PARTS 15.1 |
| 813 513 69 | NEEDLE BEARING | 2 | ||
| 17 | 152 524 38 | SIDE BOLT | 4 | |
| 18 | 154 122 98 | PIN | 1 | |
| 20 | 152 525 68 | CAP NUT | 8 | Side bolt |
| 21 | 154 115 68 | DRIVER (BRONZE) | 1 | COUPLING |
| 24 | 150 689 38 | BACKING PLATE | 2 | |
| 27 | 850 687 49 | DOUBLE LOCK WASHER | 13 | M16 |
| 30 | 442 735 20 | HEXAGON HEAD BOLT | 4 | M24X140 m8.8 |
| 31 | 800 538 69 | HEXAGON HEAD SCREW | 6 | M16X45 m8.8 |
| 33 | 801 777 39 | LOCK NUT | 4 | M24 m8 |
| 37 | 804 094 09 | O-RING | 1 | 114,5X3 |
| 38 | 802 441 79 | O-RING | 1 | 139,5X3 |
| 42 | 800 805 39 | O-RING | 1 | 69,5X3 |
| 43 | 522 113 40 | O-RING | 1 | 29,2X3 |
| 46 | 819 539 09 | ROD SEAL | 2 | Ø52 |
| 48 | 302 898 71 | FLUSHING DEVICE ASSEMBLY | 1 | SECTION 6 PAGE 8 |
| 54 | 817 094 69 | ADAPTOR | 1 | JIC 3/4-16 |
| 57 | 817 097 49 | PLUG | 2 | 3/4-16 JIC |
| 58 | 810 345 69 | PLUG | 2 | 1,1/16-12 JIC |
| 71 | 154 127 24 | HYDR. MOTOR ASSY | 1 | SECTION 6 PAGE 10 |
| 72 | 816 768 29 | STRAIGHT FITTING | 2 | 1,1/16"-12 JIC |
| 73 | 817 098 79 | STRAIGHT THREAD ELBOW | 1 | 3/4-16 JIC |
| 82 | 851 284 69 | DOUBLE LOCK WASHER | 4 | M24 |
| 83 | 151 739 28 | CONNECTION PIECE | 1 | |
| 84 | 853 533 99 | O-RING | 3 | 27,30x2,40 |
| 85 | 800 527 29 | HEXAGON HEAD SCREW | 4 | M10x50 |
| 86 | 851 282 09 | DOUBLE LOCK WASHER | 4 | M10 |
| 885 630 39 | SEAL KIT | 1 | INCL. PARTS 1.2-1.7, 16, 37-47, 55.3, 56.6, | |
| 150 730 78 | TOOL SET | 1 | SECTION 6 PAGE 16 | |
| 550 740 57 | BB | |||
| 550 740 57 | BB | |||
| 1 | 303 784 38 | BODY | 1 | INCL. PARTS 1.1-1.7 |
| 150 708 68 | PLUG | 1 | R 3/4" | |
| 817 741 29 | O-RING | 1 | 23,3X2,4 | |
| 855 968 89 | O-RING | 2 | 30,2X3 90ShA | |
| 801 467 49 | O-RING | 2 | 64,5 x 3-1 | |
| 867 613 69 | O-RING | 1 | 164,5X3 | |
| 856 811 29 | O-RING | 2 | 174X3 | |
| 522 091 30 | O-RING | 6 | 22,2X3-1 | |
| 3 | 152 538 58 | PLATE | 1 | Accumulator place shield |
| 4 | 152 541 71 | REAR COVER | 1 | |
| 8 | 154 045 68 | PRESSURE ACCUMULATOR | 1 | SECTION 6 PAGE 13 |
| 9 | 154 046 98 | PRESSURE ACCUMULATOR | 1 | SECTION 6 PAGE 14 |
| 10 | 097 055 08 | CYLINDER | 1 | Rear |
| 11 | 154 134 58 | BEARING BUSHING | 1 | |
| 12 | 096 714 18 | DISTRIBUTOR | 1 | |
| 13 | 154 141 88 | PISTON | 1 | |
| 14 | 097 049 08 | CYLINDER | 1 | Front INCL. PARTS 14.1 |
| 092 564 78 | BUSHING | 1 | FOR FRONT CYLINDER | |
| 16 | 152 539 88 | GASKET PLATE | 1 | |
| 19 | 800 545 99 | HEXAGON HEAD SCREW | 6 | M20X60 m8.8 |
| 20 | 152 525 68 | CAP NUT | 8 | Side bolt |
| 27 | 850 687 49 | DOUBLE LOCK WASHER | 13 | M16 |
| 29 | 800 196 59 | HEXAGON HEAD SCREW | 3 | M16X30 |
| 34 | 802 198 29 | HEXAGON HEAD BOLT | 8 | 16X70 m8.8 |
| 39 | 819 532 09 | O-RING | 1 | 64,5X3 |
| 40 | 801 518 59 | O-RING | 4 | 84,5X3 |
| 41 | 818 735 39 | O-RING | 1 | 32,2X3 |
| 47 | 850 814 59 | ROD SEAL | 2 | |
| 55 | 152 375 58 | BANJO ADAPTER | 1 | INCL. PARTS 55.1-55.5 |
| 152 373 08 | BANJO ADAPTER | 1 | R 3/4" | |
| 152 374 28 | BANJO BOLT | 1 | R 1" | |
| 880 779 09 | BONDED SEAL | 2 | 33.89x42.80x3.4 1" | |
| 816 768 29 | STRAIGHT FITTING | 1 | 1,1/16"-12 JIC | |
| 816 909 59 | PLUG | 1 | 1,1/16 12JIC | |
| 56 | 152 375 51 | BANJO ADAPTER | 1 | INCL. PARTS 56.1-56.6 |
| 151 942 08 | ORIFICE ADAPTER | 1 | R3/4"-1 1/16"-12 | |
| 800 348 19 | BONDED SEAL | 1 | U 27,2X36X2 D2=28,9 | |
| 81 | 851 283 39 | DOUBLE LOCK WASHER | 6 | M20 |
| 885 630 39 | SEAL KIT | 1 | INCL. PARTS 1.2-1.7, 16, 37-47, 55.3, 56.6, | |
| 150 730 78 | TOOL SET | 1 | SECTION 6 PAGE 16 | |
| 302 898 71 | B | |||
| 302 898 71 | B | |||
| 1 | 303 786 98 | FLUSHING DEVICE ASSEMBLY | 1 | INCL. PARTS 1.1-1.5 |
| 152 519 68 | SHANK BUSHING | 1 | D110 d55 L54 | |
| 806 448 09 | PLUG | 1 | 1/4" | |
| 448 473 80 | HEXAGON SOCKET SET SCREW | 1 | M10X10 m8.8 DIN 913 | |
| 801 849 99 | SPRING-TYPE STRAIGHT PIN | 1 | 16X40 DIN 7343 | |
| 865 683 09 | PLUG | 2 | R1/8" | |
| 2 | 152 526 98 | GASKET PLATE | 1 | 1x196x250 |
| 3 | 154 129 88 | COVER | 1 | INCL. PART 3.1 |
| 152 266 48 | BUSHING BEARING | 1 | 2" | |
| 4 | 153 949 08 | FLANGE FITTING | 1 | |
| 5 | 154 128 58 | SEAL HOUSING | 1 | D52 HL700 |
| 6 | 150 694 08 | GASKET PLATE | 1 | |
| 7 | 150 695 38 | GASKET PLATE | 1 | 1x80x119,6 |
| 8 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | 1/2 x3/4-16 JIC 2063-8-8 |
| 10 | 850 687 49 | DOUBLE LOCK WASHER | 5 | M16 |
| 11 | 800 196 59 | HEXAGON HEAD SCREW | 5 | M16X30 |
| 12 | 817 097 49 | PLUG | 1 | 3/4-16 JIC |
| 13 | 800 118 39 | O-RING | 3 | 79,5X3 |
| 14 | 802 441 79 | O-RING | 1 | 139,5X3 |
| 15 | 522 143 70 | O-RING | 1 | 39,2X3 |
| 16 | 150 206 78 | U-SEAL | 5 | 52-69-9 |
| 17 | 522 113 40 | O-RING | 1 | 29,2X3 |
| 18 | 448 215 20 | HEXAGON SOCKET SET SCREW | 2 | M8X10 m8.8 DIN 913 |
| 19 | 882 374 79 | STRAIGHT THREAD ELBOW | 1 | 1,1/16 12JIC |
| 20 | 816 909 59 | PLUG | 1 | 1,1/16 12JIC |
| 886 304 49 | SEAL KIT FOR FLUSHING HOUSING | INCL. PARTS 2, 6-7, 13-17 | ||
| 154 127 24 | BBB | |||
| 154 127 24 | BBB | |||
| 2 | 303 789 78 | BEARING HOUSING | 1 | HL700 |
| 3 | 514 015 60 | LOCK NUT | 1 | (M55X2) |
| 4 | 514 411 60 | LOCK WASHER | 1 | MB 11 |
| 5 | 855 464 39 | SPHERICAL ROLLER BEARING | 1 | SKF 22211 CC |
| 6 | 800 957 69 | CIRCLIP | 2 | 85X3 |
| 7 | 550 144 58 | COVER | 1 | Hydraulic motor, HL700/HL800T OMT |
| 8 | 867 144 89 | HEXAGON SOCKET HEAD SCREW | 13 | M8X25 - 12.9 |
| 10 | 302 889 98 | ROTATION SHAFT | 1 | HL700 |
| 11 | 150 613 08 | THRUST | 1 | Rotation axle |
| 12 | 883 983 29 | SHAFT SEAL | 2 | 65x85x7 |
| 13 | 800 816 79 | O-RING | 1 | 124,5X3-1 |
| 14 | 801 496 49 | O-RING | 1 | 94,5X3 |
| 16 | 851 281 89 | DOUBLE LOCK WASHER | 13 | M8 |
| 30 | 550 036 53 | HEXAGON HEAD BOLT | 4 | M14 X 140 |
| 550 259 00 | SEAL KIT | INCL. PARTS 13 | ||
| 867 666 99 | SEAL KIT | INCL. PARTS 12-14 | ||
| 871 806 69 | SPHERICAL ROLLER BEARING | |||
| 302 897 41 | HOUSING ASSEMBLY | |||
| 2 | 152 521 58 | BEARING BUSHING | 1 | D140 d110 L71 |
| 3 | 152 523 08 | BUSHING | 1 | L=28 |
| 4 | 152 522 88 | BUSHING | 1 | L=49 |
| 6 | 885 525 39 | U-SEAL | 1 | 53-65-6 |
| 7 | 886 450 09 | BEARING BUSHING | 1 | 140/145 50 |
| 8 | 865 683 09 | PLUG | 1 | R1/8" |
| 9 | 857 137 29 | PLUG | 1 | R1/4" |
| 10 | 812 604 09 | PLUG | 1 | R3/8 |
| 11 | 812 605 29 | PLUG | 1 | 139-8 R1/2" |
| 13 | 801 802 69 | BONDED SEAL | 2 | U 13,7X22X1,5 D2=15,4 |
| 14 | 801 031 49 | BONDED SEAL | 1 | U 17,4X24X1,5 |
| 15 | 800 347 99 | BONDED SEAL | 1 | U 21,5X28,7X2,5 D2=23,15 |
| 16 | 448 473 80 | HEXAGON SOCKET SET SCREW | 1 | M10X10 m8.8 DIN 913 |
| 17 | 885 556 99 | O-RING | 1 | 10x3 |
| 18 | 855 968 89 | O-RING | 10 | 30,2X3 90ShA |
| 19 | 522 480 00 | O-RING | 1 | 179X3 |
| 20 | 885 559 79 | O-RING | 1 | 290x3 |
| 21 | 800 118 39 | O-RING | 2 | 79,5X3 |
| 22 | 150 693 88 | LOCKING SCREW | 1 | M12, Gearing, HL700 |
| 24 | 448 215 20 | HEXAGON SOCKET SET SCREW | 1 | M8X10 m8.8 DIN 913 |
| 885 630 39 | SEAL KIT | 1 | INCL. PARTS 13-14, 18 | |
| 550 348 89 | SPACER/ ROCK DRILL | |||
| 2 | 550 049 54 | BUSHING | 1 | HL700 SPACER , AXIAL BEARING |
| 3 | 814 780 09 | O-RING | 1 | 72x3 |
| 4 | 150 780 18 | GLAND | 1 | HL700 HL600 spacer |
| 5 | 801 849 99 | SPRING-TYPE STRAIGHT PIN | 1 | 16X40 DIN 7343 |
| 6 | 150 707 38 | DOWEL PIN | 1 | D16 L47,5 |
| 7 | 810 352 99 | PLUG | 1 | 3/8 |
| 8 | 801 031 49 | BONDED SEAL | 1 | U 17,4X24X1,5 |
| 9 | 857 137 29 | PLUG | 1 | R1/4" |
| 10 | 801 802 69 | BONDED SEAL | 1 | U 13,7X22X1,5 D2=15,4 |
| 11 | 522 077 80 | O-RING | 1 | 19,2X3 |
| 12 | 819 533 39 | O-RING | 1 | 24,2X3 |
| 13 | 885 557 19 | O-RING | 8 | 28x3 |
| 14 | 800 120 29 | O-RING | 2 | 89,5X3 |
| 15 | 885 558 49 | O-RING | 1 | 233x3 |
| 16 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | 1/2 x3/4-16 JIC 2063-8-8 |
| 17 | 817 097 49 | PLUG | 1 | 3/4-16 JIC |
| 154 045 68 | PRESSURE ACCUMULATOR | |||
| 3 | 152 357 98 | DIAPHRAGM | 1 | HL700 HL1500 |
| 4 | 807 590 69 | VALVE | 1 | |
| 869 733 29 | O-RING | 1 | 14,0x2 | |
| 851 682 19 | PROTECTING CAP | 1 | ||
| 5 | 522 134 90 | O-RING | 1 | 129,5X3-1 |
| 8 | 819 532 09 | O-RING | 1 | 64,5X3 |
| 085 370 18 | PROTECTING CAP | 1 | ||
| 154 046 98 | LOW PRESSURE ACCUMULATOR | |||
| 3 | 152 357 98 | DIAPHRAGM | 1 | HL700 HL1500 |
| 4 | 807 590 69 | VALVE | 1 | |
| 869 733 29 | O-RING | 1 | 14,0x2 | |
| 851 682 19 | PROTECTING CAP | 1 | ||
| 5 | 522 134 90 | O-RING | 1 | 129,5X3-1 |
| 8 | 819 532 09 | O-RING | 1 | 64,5X3 |
| 085 370 18 | PROTECTING CAP | 1 | ||
| 150 730 78 | D | |||
| 150 730 78 | D | |||
| 1 | 302 878 58 | MOUNTING BRACKET | 1 | FOR ROCK DRILL |
| 2 | 154 830 38 | PEDESTAL | 1 | FOR ROCK DRILL |
| 3 | 836 202 29 | EXTENSION BAR | 1 | 3/4" |
| 4 | 153 936 18 | FILLING DEVICE | 1 | INCL. PARTS 41 |
| 5 | 096 904 68 | BRACKET | 1 | ACCUM. COVER |
| 6 | 152 501 38 | TOOL | 1 | ACCUMULATOR |
| 8 | 152 584 98 | PUNCH | 1 | CHUCK |
| 9 | 088 258 18 | PUNCH | 1 | Flushing housing and front bearing |
| 10 | 088 256 68 | PUNCH | 1 | Flushing housing and front bearing |
| 12 | 152 586 48 | PUNCH | 1 | Gear housing front bearing |
| 13 | 152 585 18 | PUNCH | 1 | Gear housing rear bearing |
| 14 | 150 736 38 | PIN | 1 | BEARING OF THE GEAR HOUS |
| 15 | 085 964 88 | PUNCH | 1 | NEEDLE BEARING |
| 16 | 151 738 08 | EXTENSION BAR | 1 | PISTON, PUNCH 150 169 88 |
| 17 | 092 864 58 | PULLER SCREW | 1 | GEAR BOX BUSHINGS |
| 18 | 551 884 93 | LIFTING EYE | 2 | M16x24 |
| 21 | 087 853 38 | PUNCH | 1 | FRONT CYLINDER |
| 22 | 093 149 98 | PIN | 1 | FRONT CYLINDER |
| 24 | 833 710 99 | PICK SET | 1 | SEALS REMOVAL |
| 25 | 093 333 78 | TOOL SET | 1 | Moment socket wrench tool kit INCL. PARTS |
| 26 | 088 257 98 | PULLER SCREW | 1 | For pin |
| 33 | 090 845 48 | PRESSURE GAUGE | 1 | (0-10 bar) INCL. PARTS 40 |
| 34 | 090 300 38 | PRESSURE GAUGE | 1 | (0-100 bar) INCL. PARTS 40 |
| 35 | 087 856 18 | THRUST | 1 | FRONT CYLINDER |
| 37 | 152 583 68 | PUNCH | 1 | BUSHING OF THE GEAR BOX |
| 38 | 152 497 58 | PUNCH | 1 | SEAL OF THE HYDR. MOTOR |
| 40 | 869 598 69 | SEAL | 2 | Elbow fitting |
| 41 | 152 280 08 | HOSE ASSEMBLY | 1 | For filling device |
| 42 | 150 175 88 | PUNCH | 1 | SHANK BEARINGS |
| 43 | 150 738 98 | PUNCH | 1 | Plunger plate to Punch 15073768 and |
| 44 | 152 537 28 | PUNCH | 1 | MOTOR SHAFT SEALS |
| 46 | 150 746 48 | GAGE | 1 | No-Go gage for seal groove |
| 47 | 550 055 28 | RETAINER PLATE | 1 | Special tool for Rock Drill HL710 HL650 |
| 48 | 550 055 27 | PUNCH | 1 | HL700T HL700ST Special tool stabilator |
| 60 | 550 342 21 | PUNCH | 1 | HL700 HL700S |
| 150 734 88 | TOOL SET | 1 | INCL. PARTS 3-10, 24-25, 42 | |
| 551 897 48 | LIFTING EYE | 2 | M16 eye nut |
Ürün Özellikleri
- OEM uyumlu tasarım ve spesifikasyonlar
- Premium kalite yedek parça
- Performans ve dayanıklılık testinden geçmiş
- Atlas Copco / Epiroc ekipmanlarıyla uyumlu
- OEM parçalarıyla kıyaslandığında rekabetçi fiyat
- Anında sevkiyat için hazır
Uyumluluk Bilgisi
Bu delme vidası, ROC T15 Yüzey Delme Kulesi ve ilgili Atlas Copco / Epiroc ekipmanları için tasarlanmıştır. Sipariş vermeden önce spesifik ekipman modelinizle uyumluluğu doğrulayın.
Teknik spesifikasyonlar, uyumluluk soruları veya ayrıntılı ürün bilgisi için teknik destek ekibimizle iletişime geçin.
Sipariş Bilgileri
Mevcut Miktar: Stokta Mevcut
Teslim Süresi: 1-2 Gün
Minimum Sipariş: 1 Adet
Toplu İndirim: 10+ adet siparişlerinde geçerli
Özel siparişler veya özel talepler için satış ekibimizle iletişime geçin.
İlgili Ürünler
İlginizi çekebilecek diğer Atlas Copco / Epiroc yedek parçaları:
