In Stock
✓ Available
Sandvik HLX 5 Hydraulic Rock Drill - 550 465 99 FE / 55046599FE
Sandvik
Sandvik HLX 5 hydraulic rock drill. Complete spare parts list with 180 part numbers (catalogue 550 465 99 FE). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Compatible Brand | Sandvik |
| Reference Part Number | 550 465 99 FE / 55046599FE |
| Catalogue No. | 550 465 99 FE |
| Part Name | Rock Drills |
| Equipment Model | HLX 5 |
| Product Type | Aftermarket |
| Product Condition | New OEM-Quality |
| Origin | Turkey |
| Shipping | World-wide |
| Warranty | 12 Months |
Complete Parts List 180
All parts of this rock drill. Click a part number to request a quote.
| Ref. | Part Number | Description | Qty | Remarks |
|---|---|---|---|---|
| 550 465 99 | FE | |||
| 550 465 99 | FE | |||
| 550 465 99 | FE | |||
| 1 | 152 749 48 | FLUSHING DEVICE ASSEMBLY | 1 | SECTION 01 PAGE 8 |
| 2 | 550 466 28 | GEARBOX | 1 | SECTION 01 PAGE 12 |
| 8 | 550 577 98 | BUSHING, ROTATION | 1 | |
| 152 723 68 | CHUCK | 1 | ||
| 9 | 550 508 28 | COUPLING | 1 | 10 splines |
| 16 | 154 194 08 | GEARWHEEL | 1 | |
| 17 | 154 217 48 | SHAFT, ROTATING | 1 | OMS80, OMS100, OMS125 |
| 18 | 550 007 62 | HOUSING ASSEMBLY | 1 | - |
| 888 097 49 | BEARING, NEEDLE | 1 | D37 d30 L26 | |
| 19 | 150 797 18 | PLATE, SIDE | 2 | |
| 20 | 152 716 38 | BOLT, SPECIAL | 6 | M24x2 L118 |
| 21 | 152 525 68 | NUT, CAP | 6 | M24x2 |
| 23 | 550 034 00 | SCREW | 4 | M24x57 |
| 26 | 887 946 09 | SEAL, SHAFT | 1 | d30 |
| 27 | 511 108 30 | BEARING, BALL, DEEP GROOVE | 1 | D80 d40 L18 |
| 42 | 814 780 09 | O-RING | 8 | 72.0x3.00 |
| 44 | 853 575 89 | O-RING | 1 | 41.2X3.00 |
| 46 | 047 689 68 | GUARD | 1 | 1 1/2 |
| 47 | 280 678 90 | CLAMP | 1 | d50 |
| 550 465 99 | FE | fe | ||
| 550 465 99 | FE | |||
| 3 | 550 103 31 | FRAME ASSEMBLY | 1 | SECTION 01 PAGE 16 |
| 4 | 550 036 25 | ACCUMULATOR, DIAPHRAGM | 1 | SECTION 01 PAGE 17 |
| 5 | 550 036 27 | ACCUMULATOR, DIAPHRAGM | 1 | SECTION 01 PAGE 18 |
| 10 | 152 715 08 | BEARING | 1 | Percussion cartridge |
| 11 | 551 991 40 | PISTON | 1 | - |
| 12 | 550 047 84 | CYLINDER | 1 | - INCL. PARTS 12.2 |
| 448 580 30 | HEXAGON SOCKET SET SCREW | 6 | M6X8 m12.9 DIN 916 | |
| 13 | 152 576 38 | DISTRIBUTOR | 1 | |
| 14 | 550 023 18 | BUSHING | 1 | d37 |
| 15 | 550 026 37 | COVER | 1 | - |
| 22 | 550 097 85 | MOTOR ASSEMBLY, HYDRAULIC | 1 | SECTION 01 PAGE 14 |
| 24 | 887 944 59 | SEAL, ROD | 2 | d37 |
| 25 | 887 945 89 | SEAL, ROD | 2 | d45 |
| 28 | 550 042 26 | PLATE, GASKET | 2 | s0.5 |
| 29 | 802 198 29 | HEXAGON HEAD BOLT | 8 | M16X70 |
| 30 | 850 687 49 | WASHER, LOCK, DOUBLE | 8 | M16 |
| 36 | 550 046 25 | GASKET | 1 | s0.5 |
| 37 | 800 470 59 | HEXAGON HEAD SCREW | 4 | M12x30 |
| 38 | 851 068 09 | WASHER, LOCK, DOUBLE | 4 | M12 |
| 40 | 550 152 17 | O-RING | 1 | 245.0x3.00 |
| 41 | 801 368 49 | O-RING | 2 | 59,3X3 |
| 42 | 814 780 09 | O-RING | 8 | 72.0x3.00 |
| 43 | 550 091 05 | O-RING | 2 | 55.0x2.00 90 ShA |
| 45 | 808 788 39 | O-RING | 3 | 22.3x2.40, 90 SHORE A |
| 48 | 816 770 19 | STRAIGHT THREAD ADAPTER | 2 | G 1/2 in x JIC 1 1/16-12 |
| 49 | 816 909 59 | PLUG | 2 | JIC 1 1/16-12 |
| 004 114 06 | DECAL | 1 | Accumulators, 50x30 mm | |
| 550 252 93 | SEAL KIT | 1 | For HLX5 INCL. PARTS 24-26, 28, 36, 41, | |
| 550 065 07 | TOOL, SPECIAL | 1 | SECTION 01 PAGE 20 | |
| 005 495 19 | SERVICE KIT | 1 | SECTION 01 PAGE 26 | |
| 008 008 65 | SERVICE KIT | 1 | SECTION 01 PAGE 27 | |
| 005 501 96 | KIT | 1 | SECTION 01 PAGE 30 | |
| 005 501 98 | KIT | 1 | SECTION 01 PAGE 31 | |
| 005 663 78 | SERVICE KIT | 1 | SECTION 01 PAGE 32 | |
| 006 465 91 | SERVICE KIT | 1 | SECTION 01 PAGE 36 | |
| 152 749 48 | DB | |||
| 152 749 48 | FLUSHING DEVICE ASSEMBLY | dB | ||
| 1 | 550 056 39 | FRAME | 1 | assembly INCL. PARTS 1.2-1.3 |
| 881 140 79 | PLUG | 1 | G1/2 | |
| 865 683 09 | PLUG | 1 | G1/8 | |
| 2 | 152 745 38 | COVER, FRONT | 1 | SECTION 01 PAGE 9 |
| 152 744 08 | BUSHING, BEARING | 1 | D55 d45 L70 | |
| 3 | 152 747 98 | BUSHING, SHANK | 1 | SECTION 01 PAGE 10 |
| 152 697 08 | BUSHING | 1 | D68 d45 L56 | |
| 4 | 150 809 18 | PLATE, GASKET | 1 | s1.0 |
| 5 | 300 637 10 | O-RING | 1 | 62,2X3 |
| 6 | 152 748 18 | PLATE, GASKET | 1 | s1.0 |
| 7 | 872 189 39 | SEAL | 5 | d45 |
| 8 | 442 218 50 | HEXAGON HEAD SCREW | 4 | M16X40 - 8.8 |
| 9 | 850 687 49 | WASHER, LOCK, DOUBLE | 4 | M16 |
| 10 | 152 473 28 | SEAL HOUSING | 1 | |
| 550 668 36 | GUIDE RING, PISTON ROD | 2 | 9.7x45/50 | |
| 12 | 550 056 76 | ADAPTER ASSEMBLY | 1 | SECTION 01 PAGE 11 |
| 812 949 59 | NUT, LOCK | 1 | G 3/4 | |
| 800 348 19 | BONDED SEAL | 1 | U d27, 2xD36xs2 SC | |
| 13 | 800 816 79 | O-RING | 1 | 124.5X3.00 |
| 152 745 38 | AA | |||
| 2 | 152 744 08 | BUSHING, BEARING | 1 | D55 d45 L70 |
| 152 747 98 | SHANK BUSHING | aA | ||
| 2 | 152 697 08 | BUSHING | 1 | D68 d45 L56 |
| 550 056 76 | DD | |||
| 2 | 812 949 59 | NUT, LOCK | 1 | G 3/4 |
| 3 | 093 718 24 | USIT-SEAL | 1 | 27,4X36X2 |
| 550 466 28 | GEARBOX | cA | ||
| 2 | 152 711 08 | BUSHING, BEARING | 1 | D135 d130 L40 |
| 3 | 550 356 04 | BUSHING, BEARING | 1 | |
| 4 | 551 714 41 | BEARING ASSEMBLY | 1 | INCL. PARTS 4.3 |
| 551 706 48 | BUSHING, BEARING | 1 | D25 d19 L16.5 | |
| 5 | 865 683 09 | PLUG | 1 | G1/8 |
| 6 | 522 107 40 | O-RING | 1 | 26.2x3.00 |
| 7 | 550 036 03 | SCREW | 1 | |
| 8 | 801 802 69 | BONDED SEAL | 1 | d13,7xD22xs1,5 |
| 9 | 871 692 89 | PLUG | 1 | G1/4 |
| 550 097 85 | CC | |||
| 550 097 85 | CC | |||
| 3 | 150 800 78 | THRUST | 1 | L42.5 |
| 4 | 814 780 09 | O-RING | 1 | 72.0x3.00 |
| 5 | 550 065 90 | STUD | 4 | M12 L120 |
| 855 206 89 | O-RING | 1 | 45.0x2.00 90 ShA | |
| 814 872 89 | O-RING | 1 | 24.0x2.00 | |
| 550 091 04 | O-RING | 2 | 82x2 | |
| 550 351 48 | WASHER, SPRING | 1 | ||
| 550 103 31 | EE | |||
| 550 103 31 | EE | |||
| 2 | 150 221 58 | PLUG | 2 | G1/2 |
| 3 | 522 067 70 | O-RING | 2 | 17.3x2.40 |
| 4 | 881 140 79 | PLUG | 10 | G1/2 |
| 5 | 882 322 79 | SPRING-TYPE STRAIGHT PIN | 1 | 5x12 |
| 6 | 550 093 63 | PLUG | 1 | G1/4 (with chamfer) |
| 7 | 871 692 89 | PLUG | 3 | G1/4 |
| 8 | 881 139 09 | PLUG | 10 | G3/8 |
| 9 | 152 538 58 | PLATE | 1 | |
| 10 | 152 539 88 | PLATE, GASKET | 1 | s0.5 |
| 11 | 818 735 39 | O-RING | 1 | 32.2x3.00 |
| 12 | 800 537 39 | HEXAGON HEAD SCREW | 3 | M16X35 |
| 13 | 850 687 49 | WASHER, LOCK, DOUBLE | 3 | M16 |
| 14 | 881 141 09 | PLUG | 6 | G3/4 in |
| 15 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | G 1/2 x JIC 3/4-16 |
| 16 | 816 768 29 | STRAIGHT THREAD ADAPTER | 1 | G 3/4 x JIC 1,1/16-12 |
| 17 | 817 097 49 | PLUG | 1 | JIC 3/4-16 |
| 18 | 816 909 59 | PLUG | 2 | JIC 1 1/16-12 |
| 19 | 812 605 29 | PLUG | 1 | G1/2 in |
| 20 | 800 347 99 | BONDED SEAL | 1 | U 21,5x28,7x2,5 |
| 21 | 151 942 08 | ORIFICE, THREADED | 1 | G 3/4 x JIC 1 1/16-12, d8 |
| 22 | 550 645 26 | USIT-SEAL | 1 | U d27.1 x D34.9 x s2.5 SC |
| 550 252 93 | SEAL KIT | For HLX5 INCL. PARTS 3, 10-11 | ||
| 550 036 25 | DD | |||
| 3 | 092 602 98 | DIAPHRAGM | 1 | Stemless type, D120 |
| 4 | 807 590 69 | VALVE | 1 | Thread 1/2-20 UNJF-3A |
| 869 733 29 | O-RING | 1 | 14.0x2.00 | |
| 851 682 19 | CAP, PROTECTING | 1 | Vg8 Av3/8 | |
| 5 | 522 134 90 | O-RING | 1 | 129.5X3.00 |
| 6 | 819 532 09 | O-RING | 1 | 64.5x3.00 |
| 7 | 151 548 58 | SIGN | 1 | NOT PRESSURIZED |
| 550 036 27 | HIGH PRESSURE ACCUMULATOR | dB | ||
| 3 | 092 602 98 | DIAPHRAGM | 1 | Stemless type, D120 |
| 4 | 807 590 69 | VALVE | 1 | Thread 1/2-20 UNJF-3A |
| 869 733 29 | O-RING | 1 | 14.0x2.00 | |
| 851 682 19 | CAP, PROTECTING | 1 | Vg8 Av3/8 | |
| 5 | 522 134 90 | O-RING | 1 | 129.5X3.00 |
| 6 | 819 532 09 | O-RING | 1 | 64.5x3.00 |
| 7 | 151 548 58 | SIGN | 1 | NOT PRESSURIZED |
| 550 065 07 | E | |||
| 550 065 07 | E | |||
| 1 | 550 056 57 | PUNCH | 1 | D50, L130 |
| 2 | 152 248 88 | PUNCH | 1 | D47, L125 |
| 3 | 550 055 88 | PUNCH | 1 | D46.5, L50, M22 |
| 4 | 550 057 30 | PUNCH | 1 | D68.5, L50, M22 |
| 5 | 150 545 68 | PUNCH | 1 | D68, L95, M22 |
| 6 | 550 055 68 | PUNCH | 1 | D150, L75 |
| 7 | 151 866 08 | ARM | 1 | D41, L165, M22 |
| 8 | 550 056 20 | PUNCH | 1 | - INCL. PARTS 8.1-8.2 |
| 550 056 17 | PUNCH | 1 | D38.5, L67, Rubber | |
| 550 056 18 | BAR | 1 | D38.5, L540 | |
| 9 | 150 546 98 | THRUST | 1 | D95, d72, L129 |
| 10 | 150 551 68 | PUNCH | 1 | D19 L160 |
| 11 | 550 055 57 | PUNCH | 1 | D112, L20, M22 |
| 12 | 550 054 94 | PUNCH | 1 | D103, L20, M22 |
| 13 | 550 054 80 | PUNCH | 1 | D131.75, L20, M22 |
| 14 | 551 818 05 | GAGE | 1 | D32, for seal groove 4.2 |
| 15 | 550 103 96 | PUNCH | 1 | D50, L82.5 |
| 16 | 550 067 40 | SUPPORT, MOUNTING | 1 | - INCL. PARTS 16.1-16.2 |
| 550 057 27 | STAND | 1 | - | |
| 17 | 551 953 44 | LUG, LIFTING | 2 | M24x36 |
| 18 | 551 884 93 | LUG, LIFTING | 2 | M16x24 |
| 19 | 150 678 08 | SLEEVE, MOUNTING | 1 | D21.5, L42, Bronze |
| 20 | 150 679 28 | PUNCH | 1 | D30, L20, Plastic |
| 21 | 150 680 98 | PUNCH | 1 | D28, L60, Plastic |
| 22 | 550 058 64 | PLATE, MOUNTING | 1 | 200x85x40 |
| 23 | 152 501 38 | TOOL | 1 | D120, L32 |
| 24 | 096 876 58 | PLATE, MOUNTING | 1 | 150x124x65 |
| 25 | 152 098 78 | TOOL | 1 | D95 L46 |
| 26 | 090 300 38 | GAUGE, PRESSURE | 1 | (0-100 bar) |
| 27 | 090 845 48 | GAUGE, PRESSURE | 1 | (0-10 bar) |
| 28 | 153 936 18 | FILLING DEVICE | 1 | Inlet thread W24,32X1/14 |
| 810 791 09 | PRESSURE REDUCING VALVE | 1 | 200/100 bar N2 | |
| 152 280 08 | HOSE ASSEMBLY | 1 | ||
| 29 | 833 710 99 | HOOK SET | 1 | |
| 30 | 550 067 39 | TOOL, SPECIAL | 1 | Torque wrench set |
| 870 492 19 | TORQUE WRENCH | 1 | 80 - 400 Nm, 3/4 | |
| 870 495 09 | WRENCH, SOCKET | 1 | 24 3/4 | |
| 870 493 49 | WRENCH, SOCKET | 1 | 19, 3/4 | |
| 880 976 79 | RING INSERT TOOL | 1 | 24 | |
| 870 504 19 | RECOILLESS HAMMER | 1 | Plastic, 50 mm | |
| 870 498 89 | SPANNER, RING | 1 | 19 | |
| 870 499 09 | SPANNER, RING | 1 | 24 | |
| 870 510 19 | EXTENSION BAR | 1 | 3/4" l=100 | |
| 836 747 39 | HEXAGON HOLLOW SOCKET | 1 | 8mm, 1/2" | |
| 836 746 09 | HEXAGON HOLLOW SOCKET | 1 | 7mm, 1/2" | |
| 870 511 49 | CONVERTER | 1 | 3/4", 1/2" | |
| 886 364 09 | RING INSERT TOOL | 1 | 30 | |
| 550 835 49 | SOCKET WRENCH | 1 | 19, L83 | |
| 550 855 22 | HAMMER | 1 | copper, 2.7 kg | |
| 550 065 07 | E | |||
| 550 065 07 | E | |||
| 31 | 886 364 09 | RING INSERT TOOL | 1 | 30 |
| 32 | 872 445 79 | WRENCH, SOCKET | 1 | 46 3/4 |
| 34 | 550 435 36 | PUNCH | 1 | D30.3, L85 |
| 35 | 550 435 37 | PUNCH | 1 | D19, L210 |
| 36 | 550 416 59 | FLANGE | 1 | D95, L30, M22 |
| 37 | 550 398 97 | NIPPLE, GREASE | 1 | M16x15 |
| 38 | 550 439 65 | FLANGE | 1 | D63.5, d22.5, L20 |
| 39 | 550 439 66 | SCREW | 1 | M22x178 |
| 40 | 550 398 70 | PUNCH | 1 | D31.5, L48 |
| 41 | 550 098 84 | STOPPER | 1 | D150, d135, L3.5 |
| 42 | 550 099 24 | PUNCH | 1 | D95, L10, M22 |
| 43 | 550 099 31 | PUNCH | 1 | D47.5, L40, M22 |
| 44 | 550 855 13 | PUNCH | 1 | D22, L200 |
| 45 | 550 834 58 | PUNCH | 1 | D52, L20, M22 |
| 46 | 550 606 66 | PUNCH | 1 | D78, L50, M22 |
| 869 598 69 | SEAL | 1 | ||
| 550 479 73 | TOOL, SPECIAL | 1 | SECTION 01 PAGE 24 | |
| 550 479 73 | C | |||
| 550 479 73 | C | |||
| 1 | 153 936 18 | FILLING DEVICE | 1 | Inlet thread W24,32X1/14 |
| 810 791 09 | PRESSURE REDUCING VALVE | 1 | 200/100 bar N2 | |
| 152 280 08 | HOSE ASSEMBLY | 1 | ||
| 2 | 152 501 38 | TOOL | 1 | D120, L32 |
| 3 | 550 058 64 | PLATE, MOUNTING | 1 | 200x85x40 |
| 4 | 152 098 78 | TOOL | 1 | D95 L46 |
| 5 | 096 876 58 | PLATE, MOUNTING | 1 | 150x124x65 |
| 6 | 886 364 09 | RING INSERT TOOL | 1 | 30 |
| 7 | 550 067 39 | TOOL, SPECIAL | 1 | Torque wrench set |
| 870 492 19 | TORQUE WRENCH | 1 | 80 - 400 Nm, 3/4 | |
| 870 495 09 | WRENCH, SOCKET | 1 | 24 3/4 | |
| 870 493 49 | WRENCH, SOCKET | 1 | 19, 3/4 | |
| 880 976 79 | RING INSERT TOOL | 1 | 24 | |
| 870 504 19 | RECOILLESS HAMMER | 1 | Plastic, 50 mm | |
| 870 498 89 | SPANNER, RING | 1 | 19 | |
| 870 499 09 | SPANNER, RING | 1 | 24 | |
| 870 510 19 | EXTENSION BAR | 1 | 3/4" l=100 | |
| 836 747 39 | HEXAGON HOLLOW SOCKET | 1 | 8mm, 1/2" | |
| 836 746 09 | HEXAGON HOLLOW SOCKET | 1 | 7mm, 1/2" | |
| 870 511 49 | CONVERTER | 1 | 3/4", 1/2" | |
| 886 364 09 | RING INSERT TOOL | 1 | 30 | |
| 550 835 49 | SOCKET WRENCH | 1 | 19, L83 | |
| 550 855 22 | HAMMER | 1 | copper, 2.7 kg | |
| 8 | 833 710 99 | HOOK SET | 1 | |
| 9 | 090 300 38 | GAUGE, PRESSURE | 1 | (0-100 bar) |
| 10 | 090 845 48 | GAUGE, PRESSURE | 1 | (0-10 bar) |
| 11 | 152 248 88 | PUNCH | 1 | D47, L125 |
| 12 | 869 598 69 | SEAL | 2 | |
| 005 495 19 | EE | |||
| 005 495 19 | EE | |||
| 1 | 550 252 93 | SEAL KIT | 1 | For HLX5 |
| 2 | 092 602 98 | DIAPHRAGM | 2 | Stemless type, D120 |
| 3 | 150 797 18 | PLATE, SIDE | 2 | |
| 4 | 151 548 58 | SIGN | 2 | NOT PRESSURIZED |
| 5 | 152 723 68 | CHUCK | 1 | |
| 7 | 807 590 69 | VALVE | 2 | Thread 1/2-20 UNJF-3A |
| 8 | 888 097 49 | BEARING, NEEDLE | 1 | D37 d30 L26 |
| 11 | 085 370 18 | CAP, PROTECTING | 2 | D28, L34, RUBBER |
| 12 | 551 706 48 | BUSHING, BEARING | 1 | D25 d19 L16.5 |
| 16 | 152 711 08 | BUSHING, BEARING | 1 | D135 d130 L40 |
| 17 | 550 036 03 | SCREW | 1 | |
| 19 | 550 065 90 | STUD | 4 | M12 L120 |
| 20 | 720 851 50 | GREASE CARTRIDGE | 1 | SPECIFICATION JOINTE |
| 21 | 550 351 48 | WASHER, SPRING | 1 | |
| 008 008 65 | BB | |||
| 008 008 69 | SEAL KIT | 1 | Complete kit for flushing device assembly | |
| 2 | 550 056 76 | ADAPTER ASSEMBLY | 1 | SECTION 01 PAGE 28 |
| 3 | 152 744 08 | BUSHING, BEARING | 1 | D55 d45 L70 |
| 4 | 152 747 98 | BUSHING, SHANK | 1 | SECTION 01 PAGE 29 |
| 7 | 550 034 00 | SCREW | 4 | M24x57 |
| 550 056 76 | DD | |||
| 2 | 812 949 59 | NUT, LOCK | 1 | G 3/4 |
| 3 | 093 718 24 | USIT-SEAL | 1 | 27,4X36X2 |
| 152 747 98 | AA | |||
| 2 | 152 697 08 | BUSHING | 1 | D68 d45 L56 |
| 005 501 96 | KIT | cC | ||
| 1 | 152 576 38 | DISTRIBUTOR | 1 | |
| 2 | 302 969 08 | PISTON | 1 | HDXX BASIC |
| 3 | 550 023 18 | BUSHING | 1 | d37 |
| 4 | 152 715 08 | BEARING | 1 | Percussion cartridge |
| 005 501 98 | CC | |||
| 1 | 154 194 08 | GEARWHEEL | 1 | |
| 2 | 154 217 48 | SHAFT, ROTATING | 1 | OMS80, OMS100, OMS125 |
| 3 | 550 577 98 | BUSHING, ROTATION | 1 | |
| 4 | 550 508 28 | COUPLING | 1 | 10 splines |
| 5 | 550 356 04 | BUSHING, BEARING | 1 | |
| 005 663 78 | SERVICE KIT | cC | ||
| 1 | 550 103 31 | FRAME ASSEMBLY | 1 | SECTION 01 PAGE 34 |
| 2 | 550 466 28 | GEARBOX | 1 | SECTION 01 PAGE 35 |
| 550 103 31 | EE | |||
| 550 103 31 | EE | |||
| 2 | 150 221 58 | PLUG | 2 | G1/2 |
| 3 | 522 067 70 | O-RING | 2 | 17.3x2.40 |
| 4 | 881 140 79 | PLUG | 10 | G1/2 |
| 5 | 882 322 79 | SPRING-TYPE STRAIGHT PIN | 1 | 5x12 |
| 6 | 550 093 63 | PLUG | 1 | G1/4 (with chamfer) |
| 7 | 871 692 89 | PLUG | 3 | G1/4 |
| 8 | 881 139 09 | PLUG | 10 | G3/8 |
| 9 | 152 538 58 | PLATE | 1 | |
| 10 | 152 539 88 | PLATE, GASKET | 1 | s0.5 |
| 11 | 818 735 39 | O-RING | 1 | 32.2x3.00 |
| 12 | 800 537 39 | HEXAGON HEAD SCREW | 3 | M16X35 |
| 13 | 850 687 49 | WASHER, LOCK, DOUBLE | 3 | M16 |
| 14 | 881 141 09 | PLUG | 6 | G3/4 in |
| 15 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | G 1/2 x JIC 3/4-16 |
| 16 | 816 768 29 | STRAIGHT THREAD ADAPTER | 1 | G 3/4 x JIC 1,1/16-12 |
| 17 | 817 097 49 | PLUG | 1 | JIC 3/4-16 |
| 18 | 816 909 59 | PLUG | 2 | JIC 1 1/16-12 |
| 19 | 812 605 29 | PLUG | 1 | G1/2 in |
| 20 | 800 347 99 | BONDED SEAL | 1 | U 21,5x28,7x2,5 |
| 21 | 151 942 08 | ORIFICE, THREADED | 1 | G 3/4 x JIC 1 1/16-12, d8 |
| 22 | 550 645 26 | USIT-SEAL | 1 | U d27.1 x D34.9 x s2.5 SC |
| 550 252 93 | SEAL KIT | For HLX5 INCL. PARTS 3, 10-11 | ||
| 550 466 28 | CA | |||
| 2 | 152 711 08 | BUSHING, BEARING | 1 | D135 d130 L40 |
| 3 | 550 356 04 | BUSHING, BEARING | 1 | |
| 4 | 551 714 41 | BEARING ASSEMBLY | 1 | INCL. PARTS 4.3 |
| 551 706 48 | BUSHING, BEARING | 1 | D25 d19 L16.5 | |
| 5 | 865 683 09 | PLUG | 1 | G1/8 |
| 6 | 522 107 40 | O-RING | 1 | 26.2x3.00 |
| 7 | 550 036 03 | SCREW | 1 | |
| 8 | 801 802 69 | BONDED SEAL | 1 | d13,7xD22xs1,5 |
| 9 | 871 692 89 | PLUG | 1 | G1/4 |
| 006 465 91 | SERVICE KIT | cC | ||
| 1 | 152 716 38 | BOLT, SPECIAL | 6 | M24x2 L118 |
| 2 | 152 525 68 | NUT, CAP | 6 | M24x2 |
| 550 479 73 | C | |||
| 550 479 73 | C | |||
| 1 | 153 936 18 | FILLING DEVICE | 1 | Inlet thread W24,32X1/14" INCL. PARTS |
| 810 791 09 | PRESSURE REDUCING VALVE | 1 | 200/100 bar N2 | |
| 152 280 08 | HOSE ASSEMBLY | 1 | For filling device | |
| 2 | 152 501 38 | TOOL | 1 | D120, L32 |
| 3 | 550 058 64 | STAND | 1 | 200x85x40 |
| 4 | 152 098 78 | TOOL | 1 | D95 L46 |
| 5 | 096 876 58 | STAND | 1 | 150x124x65 |
| 6 | 886 364 09 | RING INSERT TOOL | 1 | 30 |
| 7 | 550 067 39 | SPECIAL TOOLS | 1 | Torque wrench set |
| 870 492 19 | TORQUE WRENCH | 1 | 80 - 400 Nm, 3/4" | |
| 870 495 09 | SOCKET WRENCH | 1 | 24 3/4" | |
| 870 493 49 | SOCKET WRENCH | 1 | 19, 3/4" | |
| 880 976 79 | RING INSERT TOOL | 1 | 24 | |
| 870 504 19 | RECOILLESS HAMMER | 1 | Plastic, 50 mm | |
| 870 498 89 | RING SPANNER | 1 | 19 | |
| 870 499 09 | RING SPANNER | 1 | 24mm ROD | |
| 870 510 19 | EXTENSION BAR | 1 | 3/4" l=100 | |
| 836 747 39 | HEXAGON HOLLOW SOCKET | 1 | 8mm, 1/2mm | |
| 836 746 09 | SOCKET WRENCH | 1 | 8mm, 1/2" | |
| 870 511 49 | CONVERTER | 1 | IN 3/4"- 1/2" OUT | |
| 886 364 09 | RING INSERT TOOL | 1 | 30 | |
| 550 835 49 | SOCKET WRENCH | 1 | 19 mm, L = 83 mm | |
| 550 855 22 | HAMMER | 1 | copper, 2.7 kg | |
| 8 | 833 710 99 | PICK SET | 1 | - |
| 9 | 090 300 38 | PRESSURE GAUGE | 1 | (0-100 bar) |
| 10 | 090 845 48 | PRESSURE GAUGE | 1 | (0-10 bar) |
| 11 | 152 248 88 | PUNCH | 1 | D47, L125 |
| 12 | 869 598 69 | SEAL | 2 | - |
Product Features
- OEM-compatible design and specifications
- Premium quality aftermarket component
- Tested for performance and durability
- Compatible with Atlas Copco / Epiroc equipment
- Competitive pricing compared to OEM parts
- Available for immediate shipment
Compatibility Information
This drilling screw is designed for the ROC T15 Surface Drill Rig and related Atlas Copco / Epiroc equipment. Please verify compatibility with your specific equipment model before placing an order.
For technical specifications, compatibility questions, or detailed product information, please contact our technical support team.
Ordering Information
Quantity Available: In Stock
Lead Time: 1-2 Days
Minimum Order: 1 Unit
Bulk Discounts: Available on orders of 10+ units
Contact our sales team for custom orders or special requests.
Related Products
Other Atlas Copco / Epiroc spare parts that may interest you:
