In Stock
✓ Available
Sandvik HLX 5 Hydraulic Rock Drill - 550 465 99-B / 55046599B
Sandvik
Sandvik HLX 5 hydraulic rock drill. Complete spare parts list with 161 part numbers (catalogue 550 465 99-B). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Compatible Brand | Sandvik |
| Reference Part Number | 550 465 99-B / 55046599B |
| Catalogue No. | 550 465 99-B |
| Part Name | Rock Drills |
| Equipment Model | HLX 5 |
| Product Type | Aftermarket |
| Product Condition | New OEM-Quality |
| Origin | Turkey |
| Shipping | World-wide |
| Warranty | 12 Months |
Complete Parts List 161
All parts of this rock drill. Click a part number to request a quote.
| Ref. | Part Number | Description | Qty | Remarks |
|---|---|---|---|---|
| 550 465 99 | A | |||
| 550 465 99 | A | |||
| 550 465 99 | A | |||
| 1 | 152 749 48 | FLUSHING DEVICE ASSEMBLY | 1 | SECTION 7 PAGE 10 |
| 2 | 550 466 28 | GEARBOX | 1 | SECTION 7 PAGE 12 |
| 8 | 550 577 98 | ROTATION BUSHING | 1 | for HLX5 |
| 152 723 68 | DRILL SLEEVE | 1 | ||
| 9 | 550 508 28 | DRIVER (BRONZE) | 1 | |
| 16 | 154 194 08 | GEAR WHEEL | 1 | m=3.5 |
| 17 | 154 217 48 | ROTATION SHAFT | 1 | |
| 18 | 550 007 62 | HOUSING ASSEMBLY | 1 | |
| 888 097 49 | NEEDLE BEARING | 1 | D37 d30 L36 | |
| 19 | 150 797 18 | SIDE PLATE | 2 | |
| 20 | 152 716 38 | SPECIAL BOLT | 6 | |
| 21 | 152 525 68 | CAP NUT | 6 | Side bolt |
| 23 | 550 034 00 | SCREW | 4 | |
| 26 | 887 946 09 | SHAFT SEAL | 1 | 30,0 x 37,5 x 3,2 |
| 27 | 511 108 30 | DEEP GROOVE BALL BEARING | 1 | |
| 39 | 152 748 18 | GASKET PLATE | 1 | 1x182x184 |
| 42 | 800 658 09 | O-RING | 8 | 74,5 x 3-1 |
| 44 | 853 575 89 | O-RING | 1 | 41,2 x 3-1, NBR, 70 SHORE A |
| 46 | 047 689 68 | GUARD | 1 | 1 1/2" SHANK |
| 47 | 280 678 90 | CLAMP | 1 | Ø 50 |
| 550 252 93 | SEAL KIT | 1 | INCL. PARTS 24-26, 28, 36, 39, 41-44 | |
| 550 065 07 | SPECIAL TOOLS | 1 | SECTION 7 PAGE 18 | |
| 550 465 99 | A | |||
| 550 465 99 | A | |||
| 3 | 550 103 31 | FRAME ASSEMBLY | 1 | SECTION 7 PAGE 14 |
| 4 | 550 036 25 | PRESSURE ACCUMULATOR | 1 | SECTION 7 PAGE 15 |
| 5 | 550 036 27 | PRESSURE ACCUMULATOR | 1 | SECTION 7 PAGE 16 |
| 10 | 152 715 08 | BEARING | 1 | |
| 11 | 302 969 08 | PISTON | 1 | |
| 12 | 550 047 84 | CYLINDER | 1 | pilot cylinder |
| 13 | 152 576 38 | DISTRIBUTOR | 1 | |
| 14 | 550 023 18 | BUSHING | 1 | REAR bushing assy |
| 15 | 550 026 37 | COVER | 1 | REAR |
| 22 | 550 097 85 | ASSEMBLY KIT | 1 | SECTION 7 PAGE 11 |
| 24 | 887 944 59 | ROD SEAL | 2 | |
| 25 | 887 945 89 | ROD SEAL | 2 | |
| 28 | 550 042 26 | GASKET PLATE | 2 | FOR PRESSURE ACCUMULATOR |
| 29 | 802 198 29 | HEXAGON HEAD BOLT | 8 | 16X70 m8.8 |
| 30 | 850 687 49 | DOUBLE LOCK WASHER | 8 | M16 |
| 36 | 550 046 25 | GASKET | 1 | FOR REAR COVER |
| 37 | 800 470 59 | HEXAGON HEAD SCREW | 4 | M12x30 m8.8 |
| 38 | 851 068 09 | DOUBLE LOCK WASHER | 4 | M12 |
| 40 | 550 152 17 | O-RING | 1 | 245x3 |
| 41 | 801 368 49 | O-RING | 2 | 59,5X3 |
| 42 | 800 658 09 | O-RING | 8 | 74,5 x 3-1 |
| 43 | 550 091 05 | O-RING | 2 | 55 x 2, 90 SHORE A |
| 45 | 808 788 39 | O-RING | 3 | 22,3 x 2,4, NBR 156, 90 SHORE A |
| 48 | 816 770 19 | STRAIGHT THREAD ADAPTER | 2 | JIC 1 1/16"-12 |
| 49 | 816 909 59 | PLUG | 2 | 1,1/16 12JIC |
| 550 252 93 | SEAL KIT | 1 | INCL. PARTS 24-26, 28, 36, 39, 41-44 | |
| 550 065 07 | SPECIAL TOOLS | 1 | SECTION 7 PAGE 18 | |
| 152 749 48 | D | |||
| 152 749 48 | D | |||
| 1 | 550 056 39 | BODY | 1 | INCL. PARTS 50-53 |
| 2 | 152 745 38 | FRONT COVER | 1 | INCL. PARTS 80-81 |
| 3 | 152 747 98 | SHANK BUSHING | 1 | INCL. PARTS 82-83 |
| 4 | 150 809 18 | GASKET PLATE | 1 | For flushing device |
| 5 | 300 637 10 | O-RING | 1 | 62,2X3 |
| 6 | 152 748 18 | GASKET PLATE | 1 | 1x182x184 |
| 7 | 872 189 39 | U-SEAL | 5 | 45-104 (45X60X10) |
| 8 | 442 218 50 | HEXAGON HEAD SCREW | 4 | M16X40 |
| 9 | 850 687 49 | DOUBLE LOCK WASHER | 4 | M16 |
| 10 | 550 695 68 | SEAL HOUSING | 1 | INCL. PARTS 84-85 |
| 12 | 550 056 76 | ADAPTER ASSEMBLY | 1 | INCL. PARTS 86-88 |
| 13 | 800 816 79 | O-RING | 1 | 124,5X3-1 |
| 51 | 881 140 79 | PLUG | 1 | R1/2", E336-1/2" |
| 52 | 865 683 09 | PLUG | 1 | R1/8" |
| 53 | 550 093 63 | PLUG | 1 | |
| 39 | 152 748 18 | GASKET PLATE | 1 | 1x182x184 |
| 152 744 08 | BEARING BUSHING | 1 | D55 d45 L70 | |
| 152 697 08 | BUSHING | 1 | D68 d45 L56 | |
| 550 653 80 | SEAL HOUSING | 1 | ||
| 550 668 36 | PISTON ROD GUIDE RING | 2 | 9.7x45/50 | |
| 550 032 32 | ADAPTER | 1 | ||
| 812 949 59 | LOCK NUT | 1 | R 3/4'' | |
| 800 348 19 | BONDED SEAL | 1 | U 27,2X36X2 D2=28,9 | |
| 871 692 89 | PLUG | 1 | R1/4", E336-1/4" | |
| 550 097 85 | BAA | |||
| 1 | 550 019 03 | GEAR MOTOR | 1 | hydraulic motor |
| 2 | 154 223 48 | NSS FLANGE | 1 | Rotation motor cover HDXX |
| 3 | 150 800 78 | THRUST | 1 | |
| 4 | 800 658 09 | O-RING | 1 | 74,5 x 3-1 |
| 5 | 550 065 90 | STUD | 4 | |
| 6 | 851 068 09 | DOUBLE LOCK WASHER | 4 | M12 |
| 7 | 811 260 29 | LOCK NUT | 4 | M12 m8 BH8 |
| 8 | 855 207 09 | O-RING | 1 | 70x2 |
| 550 466 28 | GEARBOX | bA | ||
| 2 | 152 711 08 | BEARING BUSHING | 1 | |
| 3 | 550 356 04 | BEARING BUSHING | 1 | |
| 4 | 551 714 41 | BEARING ASSEMBLY | 1 | Front bearing assembly for HLX5 rotation |
| 551 706 48 | BEARING BUSHING | 1 | D25 d19 L16.5 | |
| 5 | 865 683 09 | PLUG | 1 | R1/8" |
| 6 | 522 107 40 | O-RING | 1 | 26,2X3-1 SMS 1586 |
| 7 | 550 036 03 | SCREW | 1 | |
| 8 | 801 802 69 | BONDED SEAL | 1 | U 13,7X22X1,5 D2=15,4 |
| 9 | 871 692 89 | PLUG | 1 | R1/4", E336-1/4" |
| 550 103 31 | C | |||
| 550 103 31 | C | |||
| 2 | 150 221 58 | PLUG | 2 | R1/2 |
| 3 | 522 067 70 | O-RING | 2 | 17,3x2,4-1 SMS 1586 |
| 4 | 881 140 79 | PLUG | 11 | R1/2", E336-1/2" |
| 5 | 882 322 79 | SPRING-TYPE STRAIGHT PIN | 1 | 5x12 |
| 6 | 550 093 63 | PLUG | 1 | |
| 871 692 89 | PLUG | 1 | R1/4", E336-1/4" | |
| 7 | 871 692 89 | PLUG | 3 | R1/4", E336-1/4" |
| 8 | 881 139 09 | PLUG | 10 | R3/8", E366-3/8" |
| 9 | 152 538 58 | PLATE | 1 | Accumulator place shield |
| 10 | 152 539 88 | GASKET PLATE | 1 | |
| 11 | 818 735 39 | O-RING | 1 | 32,2X3 |
| 12 | 800 537 39 | HEXAGON HEAD SCREW | 3 | M16x35, m8.8 |
| 13 | 850 687 49 | DOUBLE LOCK WASHER | 3 | M16 |
| 14 | 881 141 09 | PLUG | 6 | R3/4" |
| 15 | 817 094 69 | ADAPTOR | 1 | JIC 3/4-16 |
| 16 | 816 768 29 | STRAIGHT FITTING | 2 | 1,1/16"-12 JIC |
| 17 | 817 097 49 | PLUG | 1 | 3/4-16 JIC |
| 18 | 816 909 59 | PLUG | 2 | 1,1/16 12JIC |
| 550 252 93 | SEAL KIT | INCL. PARTS 3, 10-11 | ||
| 550 036 25 | A | |||
| 3 | 092 602 98 | DIAPHRAGM | 1 | |
| 4 | 807 590 69 | VALVE | 1 | |
| 869 733 29 | O-RING | 1 | 14,0x2 | |
| 851 682 19 | PROTECTING CAP | 1 | ||
| 5 | 522 134 90 | O-RING | 1 | 129,5X3-1 |
| 6 | 819 532 09 | O-RING | 1 | 64,5X3 |
| 550 036 27 | HIGH PRESSURE ACCUMULATOR | aA | ||
| 3 | 092 602 98 | DIAPHRAGM | 1 | |
| 4 | 807 590 69 | VALVE | 1 | |
| 869 733 29 | O-RING | 1 | 14,0x2 | |
| 851 682 19 | PROTECTING CAP | 1 | ||
| 5 | 522 134 90 | O-RING | 1 | 129,5X3-1 |
| 6 | 819 532 09 | O-RING | 1 | 64,5X3 |
| 550 065 07 | D | |||
| 550 065 07 | D | |||
| 1 | 550 056 57 | PUNCH | 1 | Assembly of needle bearing, HLX5 |
| 2 | 152 248 88 | PUNCH | 1 | Assembly of front bearings |
| 3 | 550 055 88 | PUNCH | 1 | Removal of seal housing, HLX5 spacer |
| 4 | 550 057 30 | PUNCH | 1 | Removal of chuck bearing, HLX5 |
| 5 | 150 545 68 | PUNCH | 1 | Front bearings, motor shaft assy in |
| 6 | 550 055 68 | PUNCH | 1 | Assembly of front bearing, HLX5 gear housing |
| 7 | 151 866 08 | ARM | 1 | For special tools |
| 8 | 550 056 20 | PUNCH | 1 | INCL. PARTS 55-56 |
| 9 | 150 546 98 | THRUST | 1 | Front bearings out |
| 10 | 150 551 68 | PUNCH | 1 | Front needle bearing out |
| 11 | 550 055 57 | PUNCH | 1 | Assembly of rear bearing, HLX5 gear housing |
| 12 | 550 054 94 | PUNCH | 1 | Removal of rear bearing, HLX5 gear housing |
| 13 | 550 054 80 | PUNCH | 1 | Removal of front bearing. HLX5 gear housing |
| 14 | 150 746 48 | GAGE | 1 | No-Go gage for seal groove |
| 15 | 550 103 96 | PUNCH | 1 | Assy of needle bearings for rotation shaft, HL |
| 16 | 550 067 40 | MOUNTING SUPPORT | 1 | INCL. PARTS 53-54 |
| 17 | 449 701 50 | LIFTING EYE | 2 | M24 C15 |
| 18 | 449 697 70 | LIFTING EYE | 2 | M16 C15 DIN 580 |
| 19 | 150 678 08 | PUNCH | 1 | STABILATOR PISTON SEAL MOUNTING |
| 20 | 150 679 28 | PUNCH | 1 | |
| 21 | 150 680 98 | PUNCH | 1 | |
| 22 | 550 058 64 | STAND | 1 | Stand for accumulator |
| 23 | 152 501 38 | TOOL | 1 | ACCUMULATOR |
| 24 | 096 876 58 | MOUNTING TOOL | 1 | For pressure accumulator |
| 25 | 152 098 78 | TOOL | 1 | For pressure accumulator bottom |
| 26 | 090 300 38 | PRESSURE GAUGE | 1 | (0-100 bar) |
| 27 | 090 845 48 | PRESSURE GAUGE | 1 | (0-10 bar) |
| 28 | 153 936 18 | FILLING DEVICE | 1 | INCL. PARTS 51 |
| 29 | 833 710 99 | PICK SET | 1 | SEALS REMOVAL |
| 30 | 550 067 39 | SPECIAL TOOLS | 1 | |
| 870 492 19 | WRENCH | 1 | 730/V40 | |
| 870 495 09 | SOCKET WRENCH | 1 | 24mm, 3/4" | |
| 870 493 49 | SOCKET 19MM | 1 | 3/4" | |
| 880 976 79 | OPEN END SOCKET | 1 | ||
| 870 504 19 | HAMMER | 1 | ||
| 870 498 89 | RING SPANNER | 1 | For accumulator valve, 19mm | |
| 870 499 09 | RING SPANNER | 1 | 24mm | |
| 870 510 19 | EXTENSION BAR | 1 | 3/4" l=100 | |
| 836 746 09 | SOCKET WRENCH | 1 | ||
| 836 747 39 | HEX SOCKET WRENCH KLM 8 | 1 | ||
| 870 511 49 | CONVERTER | 1 | IN 3/4"- 1/2" OUT | |
| 31 | 886 364 09 | END SOCKET | 1 | |
| 32 | 872 445 79 | SOCKET 46MM | 1 | 46mm, 3/4" |
| 34 | 550 435 36 | PUNCH | 1 | for hlx5 |
| 35 | 550 435 37 | PUNCH | 1 | for hlx5 |
| 36 | 550 416 59 | FLANGE | 1 | for HLX5 special tools |
| 37 | 550 398 97 | GREASE NIPPLE | 1 | for HLX5T |
| 38 | 550 439 65 | FLANGE | 1 | for hlx5t.special tools |
| 39 | 550 439 66 | SCREW | 1 | for hlx5t. special tools |
| 40 | 550 398 70 | PUNCH | 1 | for HLX5 |
| 41 | 550 098 84 | STOPPER | 1 | Assembly depth limiter |
| 42 | 550 099 24 | PUNCH | 1 | Removal of rear bearing, HLX5D gear |
| 43 | 550 099 31 | PUNCH | 1 | Removal and assembly of chuck, HLX5D |
| 44 | 550 855 13 | PUNCH | 1 | for hlx5 |
| 45 | 550 834 58 | PUNCH | 1 | for hlx5-serie. special tools |
| 550 065 07 | D | |||
| 550 065 07 | D | |||
| 46 | 550 606 66 | PUNCH | 1 | Removal of chuck bearing. HLX5T,HFX5T |
| 152 280 08 | HOSE ASSEMBLY | For filling device | ||
| 550 057 27 | STAND | 1 | ||
| 098 067 79 | ASENNUSTASO HE425 HL438 HL500 | 1 | ||
| 550 056 18 | BAR | 1 | ||
| 550 056 17 | PUNCH | 1 | ||
| 550 479 73 | SPECIAL TOOLS | 1 | INCL. PARTS 22-28, 30, 31 |
Product Features
- OEM-compatible design and specifications
- Premium quality aftermarket component
- Tested for performance and durability
- Compatible with Atlas Copco / Epiroc equipment
- Competitive pricing compared to OEM parts
- Available for immediate shipment
Compatibility Information
This drilling screw is designed for the ROC T15 Surface Drill Rig and related Atlas Copco / Epiroc equipment. Please verify compatibility with your specific equipment model before placing an order.
For technical specifications, compatibility questions, or detailed product information, please contact our technical support team.
Ordering Information
Quantity Available: In Stock
Lead Time: 1-2 Days
Minimum Order: 1 Unit
Bulk Discounts: Available on orders of 10+ units
Contact our sales team for custom orders or special requests.
Related Products
Other Atlas Copco / Epiroc spare parts that may interest you:
