Stokta Var
✓ Available
Sandvik HLX 5 Hydraulic Rock Drill - 550 467 92 / 55046792
Sandvik
Sandvik HLX 5 hydraulic rock drill. Complete spare parts list with 163 part numbers (catalogue 550 467 92). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Uyumlu Marka | Sandvik |
| Referans Parça Numarası | 550 467 92 / 55046792 |
| Katalog No. | 550 467 92 |
| Parça Adı | Rock Drills |
| Ekipman Modeli | HLX 5 |
| Ürün Tipi | Aftermarket |
| Ürün Durumu | New OEM-Quality |
| Menşei | Turkey |
| Teslimat | World-wide |
| Garanti | 12 Months |
Eksiksiz Parça Listesi 163
Bu tabancanın tüm parçaları. Teklif almak için parça numarasına tıklayın.
| Poz | Parça Numarası | Tanım | Adet | Açıklama |
|---|---|---|---|---|
| 1 | 152 749 48 | FLUSHING DEVICE ASSEMBLY | 1 | SEP. PART LIST, INCL. PART 39 |
| 2 | 550 466 28 | GEARBOX | 1 | SEP. PART LIST |
| 8 | 550 577 98 | ROTATION BUSHING | 1 | INCL. PART 60 |
| 9 | 152 508 28 | COUPLING | 1 | |
| 16 | 154 194 08 | GEAR WHEEL | 1 | |
| 17 | 154 217 48 | ROTATION SHAFT | 1 | |
| 18 | 550 007 62 | BEARING BUSHING | 1 | INCL. PART 59 |
| 19 | 150 797 18 | SLIDE WASHER | 2 | |
| 20 | 152 716 38 | STUD | 6 | |
| 21 | 152 525 68 | CAP NUT | 6 | |
| 23 | 550 034 00 | SCREW | 4 | |
| 26 | 887 946 09 | SHAFT SEAL | 1 | TG3100300--T10 |
| 27 | 511 108 30 | DEEP GROOVE BALL BEARING | 1 | |
| 39 | 152 748 18 | GASKET | 1 | |
| 42 | 800 658 09 | O--RING | 1 | 74,5X3--1, SMS 1586 |
| 44 | 853 575 89 | O--RING | 1 | 41,2X3--1, NBR, 70 SHORE A |
| 46 | 047 689 68 | RUBBER COVER | 1 | 1 1/2“ SHANK |
| 47 | 280 678 90 | HOSE CLAMP | 1 | 50 SMS 2298 |
| 59 | 888 097 49 | BEARING | 1 | |
| 60 | 152 723 68 | CHUCK | 1 | |
| 550 252 93 | SEAL KIT FOR ROCK DRILL | INCL. PARTS 26. 39. 44 | ||
| 550 065 07 | SPECIAL TOOLS | SEP. PART LIST | ||
| 1 | 550 103 31 | BODY | 1 | SEP. PART LIST |
| 4 | 550 036 25 | LOW PRESSURE ACCUMULATOR | 1 | SEP. PART LIST |
| 5 | 550 036 27 | HIGH PRESSURE ACCUMULATOR | 1 | SEP. PART LIST |
| 10 | 152 715 08 | FRONT BUSHING | 1 | |
| 11 | 302 969 08 | PISTON | 1 | |
| 12 | 550 047 84 | CYLINDER | 1 | PILOT CYLINDER |
| 13 | 152 576 38 | DISTRIBUTOR | 1 | |
| 14 | 550 023 18 | BUSHING | 1 | REAR BUSHING ASSY |
| 15 | 550 026 37 | COVER | 1 | REAR |
| 22 | 550 065 21 | ROTATION MOTOR | 1 | SEP. PART LIST |
| 24 | 887 944 59 | PISTON ROD SEAL | 2 | |
| 25 | 887 945 89 | PISTON ROD SEAL | 2 | |
| 28 | 550 042 26 | GASKET PLATE | 2 | ACCUMULATOR |
| 29 | 802 198 29 | BOLT | 8 | M16X70 -- 8.8 |
| 30 | 850 687 49 | DOUBLE LOCK WASHER | 8 | M16 |
| 36 | 550 046 25 | GASKET | 1 | |
| 37 | 800 470 59 | HEX. HEAD SCREW | 4 | M12X30 -- 8.8 |
| 38 | 851 068 09 | DOUBLE LOCK WASHER | 4 | M12 |
| 41 | 801 368 49 | O--RING | 2 | 59,5X3, NBR |
| 42 | 800 658 09 | O--RING | 8 | 74,5X3--1 SMS 1586 |
| 43 | 550 091 05 | O--RING | 2 | 55X2 90SHORE A |
| 550 252 93 | SEAL KIT FOR ROCK DRILL | INCL. PARTS 24. 25. 28. 36. 41--43 | ||
| 550 065 07 | SPECIAL TOOLS | SEP. PART LIST | ||
| 1 | 550 056 39 | FRAME ASSEMBLY | 1 | INCL. PARTS 50--53 |
| 2 | 152 745 38 | FRONT COVER | 1 | INCL. PARTS 80--81 |
| 3 | 152 747 98 | SHANK BUSHING | 1 | INCL. PARTS 82--83 |
| 4 | 150 809 18 | GASKET PLATE | 1 | 1x95 |
| 5 | 300 637 10 | O--RING | 1 | 62,2X3, NBR, 70 SHORE A |
| 6 | 152 748 18 | GASKET PLATE | 1 | 1x182x184 |
| 7 | 872 189 39 | U--SEAL | 5 | 45--60X10 |
| 8 | 442 218 50 | HEXAGON HEAD SCREW | 4 | M1640 m8.8 SFS 2064 |
| 9 | 850 687 49 | DOUBLE LOCK WASHER | 4 | M16 |
| 10 | 550 695 68 | SEAL HOUSING | 1 | INCL. PARTS 84--85 |
| 12 | 550 056 76 | ADAPTER ASSEMBLY | 1 | INCL. PARTS 86--88 |
| 13 | 800 816 79 | O--RING | 1 | 124,5X3--1 |
| 51 | 881 140 79 | PLUG | 1 | R1/2”, E336--1/2” |
| 52 | 865 683 09 | PLUG | 1 | R1/8”, E336--1/8” |
| 53 | 550 093 63 | PLUG | 1 | INCL. PART 89 |
| 81 | 152 744 08 | BEARING BUSHING | 1 | D55 d45 L70, FOR PART 2 |
| 82 | 152 697 08 | BUSHING | 1 | D68 d45 L56, FOR PART 3 |
| 84 | 550 653 80 | SEAL HOUSING, GUIDE RINGS | 1 | FOR PART 10 |
| 85 | 550 668 36 | SLYD--RING | 2 | FOR PART 10 |
| 86 | 550 032 32 | ADAPTER | 1 | FOR PART 12 |
| 87 | 812 949 59 | LOCK NUT | 1 | R 3/4”, FOR PART 12 |
| 88 | 800 348 19 | USIT--SEAL | 1 | U 27,2x36x2, FOR PART 12 |
| 89 | 871 692 89 | PLUG | 1 | R1/4”, E336--1/4”, FOR PART 53 |
| 2 | 152 711 08 | BEARING BUSHING | 1 | D135 d130 L40 |
| 3 | 550 356 04 | BEARING BUSHING | 1 | |
| 4 | 150 259 08 | BEARING HOUSING | 1 | INCL. PART 20 |
| 5 | 865 683 09 | PLUG | 1 | R1/8” |
| 6 | 522 107 40 | O--RING | 1 | 26,2X3--1 |
| 7 | 550 036 03 | SCREW | 1 | |
| 8 | 801 802 69 | USIT--SEAL | 1 | U 13,7X22X1,5 D2=15,4 |
| 9 | 871 692 89 | PLUG | 1 | R1/4” |
| 20 | 815 035 19 | BEARING | 1 | d=3/4” D=1” B=5/8” |
| 1 | 550 031 58 | BODY | 1 | |
| 2 | 150 221 58 | PLUG SCREW | 2 | |
| 3 | 522 067 70 | O--RING | 2 | 17,3X2,4--1 , NBR , 70 SHORE A |
| 4 | 881 140 79 | PLUG SCREW | 11 | R1/2”,E336--1/2” |
| 5 | 882 322 79 | SPRING--TYPE STRAIGHT PIN | 1 | 5X12 |
| 6 | 550 093 63 | PLUG SCREW | 1 | |
| 7 | 871 692 89 | PLUG SCREW | 3 | R1/4”,E336--1/4” |
| 8 | 881 139 09 | PLUG SCREW | 8 | R3/8”,E336--3/8” |
| 9 | 152 538 58 | PLATE | 1 | |
| 10 | 152 539 88 | GASKET PLATE | 1 | |
| 11 | 818 735 39 | O--RING | 1 | 32,2X3, 88NBR/156 |
| 12 | 800 537 39 | HEX. HEAD SCREW | 3 | M16X35 -- 8.8 |
| 13 | 850 687 49 | DOUBLE LOCK WASHER | 3 | M16 |
| 14 | 881 141 09 | PLUG | 6 | R3/4” |
| 15 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | 3/4--16 JIC |
| 16 | 816 768 29 | STRAIGHT THREAD ADAPTER | 2 | 1,1/16--12 JIC |
| 17 | 817 097 49 | PLUG | 1 | 3/4--16 JIC |
| 18 | 816 909 59 | PLUG | 2 | 1,1/16--12 JIC |
| 48 | 816 698 29 | STRAIGHT THREAD ADAPTER | 2 | 7/8--14JIC |
| 49 | 816 749 39 | PLUG | 2 | 7/8--14JIC |
| 21 | 808 788 39 | O--RING | 3 | 22,3X2,4 , NBR 156 , 90 SHORE A |
| 40 | 550 152 17 | O--RING | 1 | 245X3 , NBR |
| 550 036 25 | ACCUMULATOR | 1 | / 1 | |
| 3 | 092 602 98 | DIAPHRAGM | 1 | |
| 4 | 807 590 69 | VALVE ASSY | 1 | INCL. PARTS 8. 9. |
| 5 | 522 134 90 | O--RING | 1 | 129,5X3 , NBR , 70 |
| 6 | 819 532 09 | O--RING 64,5X3 | 1 | 64,5X3 SMS 1586, 88 NBR/156, 90 ShA |
| 7 | 151 548 58 | PLATE | 1 | |
| 8 | 808 010 69 | O--RING | 1 | 14X1,78 |
| 9 | 851 682 19 | CAP | 1 | |
| 3 | 092 602 98 | DIAPHRAGM | 1 | |
| 4 | 807 590 69 | VALVE ASSY | 1 | INCL. PARTS 8. 9. |
| 5 | 522 134 90 | O--RING | 1 | 129,5X3 , NBR , 70 |
| 6 | 819 532 09 | O--RING 64,5X3 | 1 | 64,5X3 SMS 1586, 88 NBR/156, 90 ShA |
| 7 | 151 548 58 | PLATE | 1 | |
| 8 | 808 010 69 | O--RING | 1 | 14X1,78 |
| 9 | 851 682 19 | CAP | 1 | |
| 3 | 150 800 72 | BUTTON | 1 | |
| 4 | 800 658 09 | O--RING | 1 | 74,5X3--1 SMS 1586 |
| 5 | 550 065 90 | STUD | 4 | FOR OMS--MOTORS HLX5 |
| 6 | 851 068 09 | LOCK WASHER | 4 | M12 |
| 7 | 811 260 29 | NUT | 4 | VM12 -- 8 |
| 8 | 855 207 09 | O--RING | 1 | 70X2 , 90 |
| 9 | 855 206 89 | O--RING | 1 | 45X2 |
| 10 | 814 872 89 | O--RING | 1 | 24X2 |
| 11 | 550 091 04 | O--RING | 2 | 82X2 |
| 12 | 550 351 48 | SPRING WASHER | 1 | |
| 1 | 550 056 57 | PUNCH | 1 | NEEDLE BEARING ASSY Ø 30mm, STAB |
| 2 | 152 248 88 | PUNCH | 1 | FRONT BEARINGS ASSY |
| 3 | 550 055 88 | PUNCH | 1 | FOR SEAL HOUSING REMOVAL |
| 4 | 550 057 30 | PUNCH | 1 | FOR CHUCK BEARING REMOVAL |
| 5 | 150 545 68 | PUNCH | 1 | FRONT BEARINGS |
| 6 | 550 055 68 | PUNCH | 1 | FRONT BEARING ASSY |
| 7 | 151 866 08 | HANDLE | 1 | FOR PUNCHES |
| 8 | 550 056 20 | PUNCH | 1 | FOR PILOT CYLINDER REMOVAL |
| 9 | 150 546 98 | THRUST | 1 | FRONT BEARINGS OUT |
| 10 | 150 551 68 | PUNCH | 1 | FRONT NEEDLE BEARING OUT |
| 11 | 550 055 57 | PUNCH | 1 | REAR BEARING ASSY. Ø 112mm |
| 12 | 550 054 94 | PUNCH | 1 | FOR REAR BEARING REMOVAL |
| 13 | 550 054 80 | PUNCH | 1 | FOR FRONT BEARING REMOVAL |
| 14 | 150 746 48 | GAGE | 1 | NO--GO GAGE FOR SEAL GROOVE |
| 15 | 550 103 96 | PUNCH | 1 | ASSEMBLY OF NEEDLE BEARINGS, HLX5 |
| 16 | 550 067 40 | MOUNTING SUPPORT | 1 | INCL. PARTS 53, 54 |
| 17 | 449 701 50 | LIFTING EYE | 2 | M24 C15 DIN 580 |
| 18 | 449 697 70 | LIFTING EYE | 2 | M16 C15 DIN 580 |
| 19 | 150 678 08 | PUNCH | 1 | FOR STABILATOR PISTON SEAL MOUNTING |
| 20 | 150 679 28 | PUNCH | 1 | FOR STABILATOR PISTON SEALS |
| 21 | 150 680 98 | PUNCH | 1 | STABILATOR PISTON SEAL MOUNTING |
| 22 | 550 058 64 | STAND | 1 | STAND FOR ACCUMULATOR |
| 23 | 152 501 38 | OPENER | 1 | ACCUMULATOR |
| 24 | 096 876 58 | STAND | 1 | FOR ACCUMULATOR |
| 25 | 152 098 78 | TOOL | 1 | FOR ACCUMULATOR BOTTOM |
| 26 | 090 300 38 | CHECKING GAUGE HP | 1 | (0--100 bar) |
| 27 | 090 845 48 | CHECKING GAUGE LP | 1 | (0--10 bar) |
| 28 | 153 936 18 | FILL. DEVICE FOR HYDR--ACCUMUL | 1 | INCL. PART 51 |
| 29 | 833 710 99 | SEALS REMOVING SET | 1 | SEALS |
| 30 | 550 067 39 | SPECIAL TOOLS INCL. PARTS | 1 | |
| 870 492 19 | TORQUE WRENCH | 1 | ||
| 870 495 09 | SOCKET 24MM | 1 | ||
| 870 493 49 | SOCKET 19MM | 1 | ||
| 880 976 79 | OPEN END SOCKET | 1 | ||
| 870 504 19 | HAMMER | 1 | ||
| 870 498 89 | SPANNER | 1 | ||
| 870 499 09 | WRENCH | 1 | ||
| 870 510 19 | EXTENSION BAR | 1 | ||
| 836 746 09 | SOCKET KLM 7 | 1 | ||
| 836 747 39 | SOCKET KLM 8 | 1 | ||
| 870 511 49 | ADAPTER | 1 | ||
| 31 | 886 364 09 | END SOCKET | 1 | REAR MOUNTING TO |
| 32 | 872 445 79 | SOCKET 46MM | 1 | 46mm 3/4” |
| 34 | 550 435 36 | PUNCH | 1 | FOR HLX5 |
| 35 | 550 435 37 | PUNCH | 1 | FOR HLX5 |
| 36 | 550 416 59 | FLANGE | 1 | FOR HLX5, special tools |
| 37 | 550 398 97 | GREASE NIPPLE | 1 | FOR HLX5T |
| 38 | 550 439 65 | FLANGE | 1 | FOR HLX5T, special tools |
| 39 | 550 439 66 | SCREW | 1 | FOR HLX5T, special tools |
| 40 | 550 398 70 | PUNCH | 1 | FOR HLX5 |
| 41 | 550 098 84 | STOPPER | 1 | LIMITER OF ASSEMBLY DEPTH |
| 42 | 550 099 24 | PUNCH | 1 | REMOVAL OF REAR BEARING, HLX5 |
| 43 | 550 099 31 | PUNCH | 1 | REMOVAL AND ASSEMBLY OF CHUCK, HLX5 |
| 51 | 152 280 08 | HOSE ASSY FOR FILLING DEVICE | 1 | |
| 52 | 869 598 69 | PRESSURE SEAL FOR PARTS 26, 27 | 2 | |
| 53 | 550 057 27 | ASSEMBLY STAND | 1 | STAND FOR ROCK DRILL HLX5 |
| 54 | 098 067 79 | STAND | 1 | |
| 55 | 550 056 18 | ROD | 1 | |
| 56 | 550 056 17 | PUNCH | 1 | |
| 57 | 550 479 73 | SPECIAL TOOL KIT FOR THE SITE | 52 | INCL. 22, 23, 24, 25, 26, 27, 28, 30, 31, 1 |
Ürün Özellikleri
- OEM uyumlu tasarım ve spesifikasyonlar
- Premium kalite yedek parça
- Performans ve dayanıklılık testinden geçmiş
- Atlas Copco / Epiroc ekipmanlarıyla uyumlu
- OEM parçalarıyla kıyaslandığında rekabetçi fiyat
- Anında sevkiyat için hazır
Uyumluluk Bilgisi
Bu delme vidası, ROC T15 Yüzey Delme Kulesi ve ilgili Atlas Copco / Epiroc ekipmanları için tasarlanmıştır. Sipariş vermeden önce spesifik ekipman modelinizle uyumluluğu doğrulayın.
Teknik spesifikasyonlar, uyumluluk soruları veya ayrıntılı ürün bilgisi için teknik destek ekibimizle iletişime geçin.
Sipariş Bilgileri
Mevcut Miktar: Stokta Mevcut
Teslim Süresi: 1-2 Gün
Minimum Sipariş: 1 Adet
Toplu İndirim: 10+ adet siparişlerinde geçerli
Özel siparişler veya özel talepler için satış ekibimizle iletişime geçin.
İlgili Ürünler
İlginizi çekebilecek diğer Atlas Copco / Epiroc yedek parçaları:
