Stokta Var
✓ Available
Sandvik RD 525 Hydraulic Rock Drill - 551 982 69 / 55198269
Sandvik
Sandvik RD 525 hydraulic rock drill. Complete spare parts list with 153 part numbers (catalogue 551 982 69). All parts are available as new OEM-quality aftermarket replacements with world-wide shipping.
| Uyumlu Marka | Sandvik |
| Referans Parça Numarası | 551 982 69 / 55198269 |
| Katalog No. | 551 982 69 |
| Parça Adı | Rock Drills |
| Ekipman Modeli | RD 525 |
| Ürün Tipi | Aftermarket |
| Ürün Durumu | New OEM-Quality |
| Menşei | Turkey |
| Teslimat | World-wide |
| Garanti | 12 Months |
Eksiksiz Parça Listesi 153
Bu tabancanın tüm parçaları. Teklif almak için parça numarasına tıklayın.
| Poz | Parça Numarası | Tanım | Adet | Açıklama |
|---|---|---|---|---|
| 551 982 69 | A | |||
| 551 982 69 | ||||
| 551 982 69 | A | |||
| 1 | 551 551 63 | FLUSHING DEVICE ASSEMBLY | SECTION 7 PAGE 10 | |
| 4 | 551 530 24 | ROTATION SHAFT | OMS80, OMS100, OMS125 | |
| 5 | 551 970 04 | GEAR BOX ASSEMBLY | SECTION 7 PAGE 13 | |
| 6 | 551 530 28 | DRIVER (BRONZE) | 10 splines | |
| 13 | 152 539 88 | GASKET PLATE | 1 | s0.5 |
| 15 | 442 219 80 | HEXAGON HEAD SCREW | 3 | M16X50 - 8.8 |
| 16 | 850 687 49 | DOUBLE LOCK WASHER | 3 | M16 |
| 17 | 551 528 68 | TIE BOLT | 4 | M27x2 |
| 19 | 551 970 01 | BEARING ASSEMBLY | - INCL. PARTS 19.2 | |
| 551 528 79 | BEARING BUSHING | 0121 d105 L34 | ||
| 20 | 551 529 97 | ROTATION BUSHING | - INCL. PARTS 20.2 | |
| 551 529 95 | BEARING BUSHING | 079 d73 | ||
| 21 | 551 970 06 | BEARING ASSEMBLY | - INCL. PARTS 21.2 | |
| 22 | 551 529 99 | DRILL SLEEVE | ||
| 23 | 551 552 04 | BEARING ASSEMBLY | - INCL. PARTS 23.2 | |
| 551 587 57 | NEEDLE BEARING | 042 d35 L20 | ||
| 24 | 551 530 23 | GEARWHEEL | ||
| 25 | 551 529 98 | SIDE PLATE | 2 | |
| 26 | 551 970 08 | SHAFT SEAL | 2 | d105 |
| 29 | 800 816 79 | O-RING | 1 | 124.5X3.00 |
| 31 | 550 034 00 | SCREW | 4 | M24x57 |
| 32 | 047 689 68 | GUARD | 1 | 1 112" |
| 33 | 280 678 90 | CLAMP | 1 | d50 |
| 34 | 445 816 90 | HEXAGON SOCKET HEAD SCREW | 3 | M12x20 |
| 36 | 818 735 39 | O-RING | 1 | 32.2x3.00 |
| 38 | 808 788 39 | O-RING | 4 | 22.3x2.40, 90 SHORE A |
| 40 | 800 658 09 | O-RING | 2 | 74.5x3.00 |
| 41 | 801 368 49 | O-RING | 2 | 59,3X3 |
| 551 732 85 | SEAL KIT | - INCL. PARTS 11, 13, 26-30, 36-42 | ||
| 552 023 89 | TOOL SET | SECTION 7 PAGE 23 | ||
| 550 479 73 | SPECIAL TOOLS | for field service | ||
| 551 982 69 | A | |||
| 551 982 69 | A | |||
| 3 | 551 587 43 | HYDRAULIC MOTOR ASSEMBLY | SECTION 7 PAGE 12 | |
| 7 | 551 530 31 | BODY CYLINDER | SECTION 7 PAGE 16 | |
| 9 | 550 036 27 | PRESSURE ACCUMULATOR | SECTION 7 PAGE 18 | |
| 10 | 550 036 25 | PRESSURE ACCUMULATOR | SECTION 7 PAGE 19 | |
| 11 | 550 042 26 | GASKET PLATE | 2 | s0.5 |
| 14 | 802 198 29 | HEXAGON HEAD SOLT | 8 | M16X70 |
| 16 | 850 687 49 | DOUBLE LOCK WASHER | 8 | M16 |
| 18 | 551 528 76 | CAP NUT | 4 | M27x2 |
| 27 | 522 067 70 | O-RING | 2 | 17.3x2.40 |
| 28 | 550 087 61 | O-RING | 25,3x2,4 | |
| 38 | 808 788 39 | O-RING | 22.3x2.40, 90 SHORE A | |
| 39 | 551 743 98 | O-RING | 270x3 | |
| 551 732 85 | SEAL KIT | - INCL. PARTS 11, 13, 26-30, 36-42 | ||
| 551 617 36 | SPECIAL TOOLS | SECTION 7 PAGE 22 | ||
| 552 023 89 | TOOL SET | SECTION 7 PAGE 23 | ||
| 550 479 73 | SPECIAL TOOLS | for field service | ||
| 551 551 63 | FLUSHING DEVICE ASSEMBLY | |||
| 551 551 63 | FLUSHING DEVICE ASSEMBLY | |||
| 1 | 551 590 74 | BODY | - INCL. PARTS 1.2-1.4 | |
| 881 140 79 | PLUG | G1/2" | ||
| 881 139 09 | PLUG | G3/8" | ||
| 865 683 09 | PLUG | G1/8" | ||
| 3 | 152 747 98 | SHANK BUSHING | - INCL. PARTS 3.2 | |
| 152 697 08 | BUSHING | 068 d45 L56 | ||
| 6 | 551 530 30 | GASKET PLATE | s1.0 1 | |
| 8 | 442 218 50 | HEXAGON HEAD SCREW | M16x40 4 | |
| 9 | 850 687 49 | DOUBLE LOCK WASHER | M16 4 | |
| 10 | 550 695 68 | SEAL HOUSING | - INCL. PARTS 10.2 1 | |
| 550 668 36 | PISTON ROD GUIDE RING | 9.7x45/50 2 | ||
| 11 | 550 056 76 | ADAPTER ASSEMBLY | G 3/4" x JIG 3/4-16 INCL. PARTS 11.2-11.3 1 | |
| 812 949 59 | LOCKNUT | G 3/4" 1 | ||
| 800 348 19 | BONDED SEAL | U d27,2xD36Xs2 SC 1 | ||
| 2 | 551 552 22 | DISTRIBUTOR | ||
| 3 | 551 592 63 | ROCK DRIL | ||
| 4 | 551 592 65 | D35 | ||
| 5 | 551 552 30 | EMBLY D47 | ||
| 6 | 551 718 26 | ROD SEAL 35 | ||
| 7 | 551 587 66 | ROD SEAL 47 | ||
| 9 | 800 658 09 | O-RING | ||
| 551 587 43 | HYDRAULIC MOTOR ASSEMBLY | |||
| 1 | 550 019 03 | HYDRAULIC MOTOR | 1 | OMS80 |
| 2 | 551 587 20 | COVER | 1 | L84.5 |
| 4 | 801 368 49 | O-RING | 1 | 59,3X3 |
| 5 | 551 587 14 | STUD | 4 | M12,L125 |
| 6 | 851 068 09 | DOUBLE LOCK WASHER | 4 | M12 |
| 7 | 811 260 29 | LOCK NUT | 4 | M12 |
| 8 | 855 207 09 | O-RING | 1 | 70X2 |
| 855 206 89 | O-RING | 1 | 45.0x2.00 90 ShA | |
| 814 872 89 | O-RING | 1 | 24.0x2.00 | |
| 550 091 04 | O-RING | 2 | 82x2 | |
| 550 351 48 | SPRING WASHER | 1 | ||
| 551 970 04 | A | |||
| 2 | 551 552 03 | BEARING ASSEMBLY | 1 | - INCL. PARTS 2.3 |
| 551 587 58 | NEEDLE BEARING | 1 | D32 d25 L20 | |
| 3 | 871 692 89 | PLUG | 5 | G1/4" |
| 4 | 801 811 49 | PLUG | 1 | G1/8" |
| 6 | 806 448 09 | PLUG | 1 | G1/4" |
| 7 | 881 139 09 | PLUG | 2 | G3/8" |
| 551 530 31 | C | |||
| 551 530 31 | BODY CYLINDER | C | ||
| 2 | 551 745 42 | PLUG | 1 | G11/4" |
| 3 | 881 142 29 | PLUG | 4 | G1" |
| 4 | 881 141 09 | PLUG | 4 | G3/4 in |
| 5 | 881 140 79 | PLUG | 5 | G112" |
| 7 | 871 692 89 | PLUG | 2 | G1/4" |
| 8 | 816 769 59 | STRAIGHT THREAD ADAPTER | 2 | G 1" x JIG 1,1116-12 |
| 9 | 816 768 29 | STRAIGHT THREAD ADAPTER | 2 | JIG 1,1/16-12 |
| 10 | 817 094 69 | STRAIGHT THREAD ADAPTER | 1 | G 1/2" x JIG 314-16 |
| 11 | 856 040 09 | STRAIGHT THREAD ADAPTER | 1 | G 3/8 in x JIG 9/16-18 |
| 12 | 882 322 79 | SPRING-TYPE STRAIGHT PIN | 1 | 5x12 |
| 13 | 800 347 99 | BONDED SEAL | 1 | U d21.5x028.7xs2.5 SC |
| 15 | 800 350 09 | BONDED SEAL | 1 | 42.7x53x3 |
| 16 | 816 909 59 | PLUG | 4 | JIG 11/16-12 |
| 18 | 857 302 19 | PLUG | JIG 9/16-18 | |
| 551 969 99 | NSS | |||
| 1 | 551 529 92 | BEARING ASSEMBLY | - INCL. PARTS 1.2-1.3 | |
| 551 528 86 | BEARING BUSHING | D77 d67 L21 | ||
| 551 529 90 | BEARING BUSHING | D98 d92 L33 | ||
| 2 | 551 528 87 | STABILIZER PISTON | - INCL. PARTS 2.2 | |
| 3 | 551 528 82 | STABILIZER PISTON | ||
| 4 | 551 969 97 | BEARING ASSEMBLY | - INCL. PARTS 4.2 | |
| 551 529 88 | BEARING BUSHING | D76 d71 L25 | ||
| 5 | 550 457 27 | ROD SEAL | d 67 | |
| 6 | 550 457 24 | ROD SEAL | d 71 | |
| 7 | 801 517 29 | O-RING | 5 | 104.5x3.00 |
| 550 036 27 | HIGH PRESSURE ACCUMULATOR | bB | ||
| 3 | 092 602 98 | BLADDER | 0120 | |
| 4 | 807 590 69 | VALVE | INCL. PARTS 4.1-4.2 | |
| 869 733 29 | O-RING | 14.0x2.00 | ||
| 5 | 522 134 90 | O-RING | 129.5X3.00 | |
| 7 | 151 548 58 | SIGN | "NOT PRESSURIZED" | |
| 550 036 25 | AB | |||
| 3 | 092 602 98 | BLADDER | D120 | |
| 4 | 807 590 69 | VALVE | INCL. PARTS 4.1-4.2 | |
| 869 733 29 | O-RING | 14.0x2.00 | ||
| 851 682 19 | PROTECTING CAP | V98 Av3/8" | ||
| 550 117 63 | PRESSURE ACCUMULATOR | bC | ||
| 5 | 807 590 69 | VALVE | INCL. PARTS 5.1-5.2 | |
| 869 733 29 | O-RING | 14.0x2.00 | ||
| 6 | 151 548 58 | SIGN | "NOT PRESSURIZED" | |
| 085 370 18 | PROTECTING CAP | D28, L34, RUBBER | ||
| 551 617 36 | A | |||
| 551 617 36 | A | |||
| 1 | 152 248 88 | PUNCH | D47, L125 | |
| 2 | 150 546 98 | THRUST | D95, d72, L 129 | |
| 3 | 150 545 68 | PUNCH | D68, L95, M22 | |
| 4 | 151 866 08 | ARM | D41, L165, M22 | |
| 5 | 550 632 78 | PUNCH | D72, L 15, M22 | |
| 12 | 551 618 88 | KEY | D110, L25 | |
| 13 | 551 619 06 | PUNCH | D74, L40, M22 | |
| 15 | 551 619 08 | PUNCH | D94,L20 | |
| 17 | 551 619 34 | PUNCH | D39, L36, M22 | |
| 21 | 551 818 05 | GAGE | D32, for seal groove 4.2 | |
| 22 | 551 621 24 | PUNCH | D118, L26, M22 | |
| 23 | 551 620 05 | HAMMER | s!lde hammer, M12, 1.1 kg | |
| 24 | 551 618 27 | PUNCH | D115, L15, M22 | |
| 25 | 551 620 30 | PUNCH | D48,L40 | |
| 26 | 551 620 60 | ARM | D25,L290 | |
| 27 | 551 620 82 | PUNCH | D54,L33 | |
| 28 | 551 620 99 | PUNCH | D78, L 16, M22 | |
| 30 | 551 805 01 | STAND | Assembly stand for RDS | |
| 31 | 552 005 90 | PUNCH | D140, d92, L 115 | |
| 32 | 552 005 92 | PUNCH | D54,L330 | |
| 33 | 152 501 38 | TOOL | D120,L32 | |
| 34 | 550 058 64 | STAND | 200x85x40 | |
| 36 | 096 876 58 | STAND | 150x124x65 | |
| 552 023 89 | TOOL KIT | |||
| 1 | 833 710 99 | PICK SET | ||
| 810 791 09 | PRESSURE REDUCING VALVE | 200/100 bar N2 | ||
| 152 280 08 | HOSE ASSEMBLY | For filling device | ||
| 3 | 090 300 38 | PRESSURE GAUGE | (0-100 bar) | |
| 4 | 090 845 48 | PRESSURE GAUGE | 1 | (0-10 bar) |
| 5 | 869 598 69 | SEAL | 2 | |
| 8 | 880 976 79 | RING INSERT TOOL | 1 | 24 |
| 9 | 886 364 09 | RING INSERT TOOL | 30 | |
| 550 500 13 | TORQUE WRENCH | 160-800 Nm | ||
| 552 027 70 | RING INSERT TOOL | 36 | ||
| 552 027 71 | RING INSERT TOOL | 30 | ||
| 550 855 22 | HAMMER | copper, 2.7 kg | ||
| 551 884 93 | LIFTING EYE | M16x24 | ||
| 551 897 48 | LIFTING EYE | M16 | ||
| 551 898 48 | LIFTING EYE | M12x18 | ||
| 551 953 43 | LIFTING EYE | M2Dx30 | ||
| 551 953 44 | LIFTING EYE | M24x36 | ||
| 552 061 33 | RING SPANNER | 38 | ||
| 870 503 99 | RING SPANNER | 41 | ||
| 552 061 34 | RING SPANNER | 46 | ||
| 552 061 36 | RING SPANNER | 50 | ||
| 552 027 23 | RING SPANNER | Set, 6-32 & 36 |
Ürün Özellikleri
- OEM uyumlu tasarım ve spesifikasyonlar
- Premium kalite yedek parça
- Performans ve dayanıklılık testinden geçmiş
- Atlas Copco / Epiroc ekipmanlarıyla uyumlu
- OEM parçalarıyla kıyaslandığında rekabetçi fiyat
- Anında sevkiyat için hazır
Uyumluluk Bilgisi
Bu delme vidası, ROC T15 Yüzey Delme Kulesi ve ilgili Atlas Copco / Epiroc ekipmanları için tasarlanmıştır. Sipariş vermeden önce spesifik ekipman modelinizle uyumluluğu doğrulayın.
Teknik spesifikasyonlar, uyumluluk soruları veya ayrıntılı ürün bilgisi için teknik destek ekibimizle iletişime geçin.
Sipariş Bilgileri
Mevcut Miktar: Stokta Mevcut
Teslim Süresi: 1-2 Gün
Minimum Sipariş: 1 Adet
Toplu İndirim: 10+ adet siparişlerinde geçerli
Özel siparişler veya özel talepler için satış ekibimizle iletişime geçin.
İlgili Ürünler
İlginizi çekebilecek diğer Atlas Copco / Epiroc yedek parçaları:
